PIC16(L)F1824/1828 Data Sheet - Microchip Technology

1 2010-2011 Microchip Technology (L) f1824 /1828 data Sheet14/20-Pin Flash Microcontrollers withnanoWatt TechnologyDS41419C-page 2 preliminary 2010-2011 Microchip Technology contained in this publication regarding deviceapplications and the like is provided only for your convenienceand may be superseded by updates. It is your responsibility toensure that your application meets with your MAKES NO REPRESENTATIONS ORWARRANTIES OF ANY KIND WHETHER EXPRESS ORIMPLIED, WRITTEN OR ORAL, STATUTORY OROTHERWISE, RELATED TO THE INFORMATION,INCLUDING BUT NOT LIMITED TO ITS CONDITION,QUALITY, PERFORMANCE, MERCHANTABILITY ORFITNESS FOR PURPOSE.

2 Microchip disclaims all liabilityarising from this information and its use. Use of Microchipdevices in life support and/or safety applications is entirely atthe buyer s risk, and the buyer agrees to defend, indemnify andhold harmless Microchip from any and all damages, claims,suits, or expenses resulting from such use. No licenses areconveyed, implicitly or otherwise, under any Microchipintellectual property Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the and other , Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the Age, Application Maestro, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, , dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP.

3 Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, , PICkit, PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the and other is a service mark of Microchip Technology Incorporated in the other trademarks mentioned herein are property of their respective companies. 2010-2011, Microchip Technology Incorporated, Printed in the , All Rights Reserved. Printed on recycled : 978-1-61341-621-1 Note the following details of the code protection feature on Microchip devices: Microchip products meet the specification contained in their particular Microchip data Sheet .

4 Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip s data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code.

5 Code protection does not mean that we are guaranteeing the product as unbreakable. Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of ourproducts. Attempts to break Microchip s code protection feature may be a violation of the Digital Millennium Copyright Act. If such actsallow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company s quality system processes and procedures are for its PIC MCUs and dsPIC DSCs, KEELOQ code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products.

6 In addition, Microchip s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. 2010-2011 Microchip Technology 3 High-Performance RISC CPU: Only 49 Instructions to Learn:- All single-cycle instructions except branches Operating Speed:- DC 32 MHz oscillator/clock input- DC 125 ns instruction cycle Up to 8 Kbytes Linear Program Memory addressing Up to 256 bytes Linear data Memory Addressing Interrupt Capability with Automatic Context Saving 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset Direct, Indirect and Relative Addressing modes:- Two full 16-bit File Select Registers (FSRs)- FSRs can read program and data memoryFlexible Oscillator Structure: Precision 32 MHz Internal Oscillator Block.

7 - Factory calibrated to 1%, typical- Software selectable frequencies range of 31 kHz to 32 MHz 31 kHz Low-Power Internal Oscillator Four Crystal modes up to 32 MHz Three External Clock modes up to 32 MHz 4X Phase Lock Loop (PLL) Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral clock stops Two-Speed Oscillator Start-up Reference Clock module:- Programmable clock output frequency and duty-cycleSpecial Microcontroller Features: operation PIC16F1824/1828 operation PIC16LF1824/1828 Self-Programmable under Software Control Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) Programmable Brown-out Reset (BOR) Extended Watchdog Timer (WDT) In-Circuit Serial Programming (ICSP ) via two pins In-Circuit Debug (ICD) via Two Pins Enhanced Low-Voltage Programming (LVP) Operating Voltage Range:- (PIC16F1824/1828)- (PIC16LF1824/1828) Programmable Code Protection Power-Saving Sleep modeExtreme Low-Power Management PIC16LF1824/1828 with nanoWatt XLP: Sleep mode: 20 nA Watchdog Timer: 500 nA Timer1 Oscillator.

8 600 nA @ 32 kHzAnalog Features: Analog-to-Digital Converter (ADC) module:- 10-bit resolution, up to 12 channels- Auto acquisition capability- Conversion available during Sleep Analog Comparator module:- Two rail-to-rail analog comparators- Power mode control- Software controllable hysteresis Voltage Reference module:- Fixed Voltage Reference (FVR) with , and output levels- 5-bit rail-to-rail resistive DAC with positive and negative reference selectionPeripheral Highlights: Up to 17 I/O Pins and 1 Input Only Pin:- High current sink/source 25 mA/25 mA- Programmable weak pull-ups- Programmable interrupt-on-change pins Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler Enhanced Timer1:- 16-bit timer/counter with prescaler- External Gate Input mode- Dedicated, low-power 32 kHz oscillator driver Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler Two Capture, Compare, PWM (CCP) modules Two Enhanced CCP (ECCP) modules:- Software selectable time bases- Auto-shutdown and auto-restart- PWM steering Master Synchronous Serial Port (MSSP) with SPI and I2 CTM with:- 7-bit address masking- SMBus/PMBusTM compatibility Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module mTouch Sensing Oscillator module.

9 - Up to 12 input channels data Signal Modulator module:- Selectable modulator and carrier sourcesPIC16(L) f1824 /182814/20-Pin Flash Microcontrollers with nanoWatt TechnologyPIC16(L) f1824 /1828DS41419C-pag e 4 preliminary 2010-2011 Microchip Technology Highlights (Continued): SR Latch:- Multiple Set/Reset input options- Emulates 555 Timer applicationsPIC16(L) f1824 /1828 Family TypesDeviceProgram MemoryData MemoryI/O s(1)10-bit ADC (ch)CapSense (ch)ComparatorsTimers (8/16-bit)EUSARTMSSPECCP (Full-Bridge)ECCP (Half-Bridge)CCPSR LatchWordsSRAM(bytes) data EEPROM(bytes)PIC16LF18244K 256256128824/111112 YesPIC16F18244K256256128824/111112Ye sPIC16LF18284K 25625618121224/111112 YesPIC16F18284K25625618121224/111112Ye sNote 1:One pin is input (L) f1824 /1828DS41419C-page 5 preliminary 2010-2011 Microchip Technology 1.

10 14-PIN DIAGRAM FOR pic16 (L) f1824 PDIP, SOIC, TSSOPPIC16(L)F18241234141312115671098 VDDCCP2(1)/P2A(1)/T1 CKI/T1 OSI/OSC1/CLKIN/RA5T1G(1)/P2B(1)/SDO(1)/C LKR/T1 OSO/CLKOUT/OSC2/CPS3/AN3/RA4 MCLR/VPP/T1G(1)/SS(1)/RA3 MDCIN2/DT(1)/RX(1)/CCP1/P1A/RC5 MDOUT/CK(1)/TX(1)/P1B/SRNQ/C2 OUT/RC4 MDMIN/SS(1)/P1C(1)/CCP2(1)/P2A(1)/C12IN3 -/CPS7/AN7/RC3 VSSRA0/AN0/CPS0/C1IN+/VREF-/DACOUT/TX(1) /CK(1)/ICSPDATRA1/AN1/CPS1/C12IN0-/VREF+ /SRI/RX(1)/DT(1)/ICSPCLKRA2/AN2/CPS2/T0 CKI/INT/C1 OUT/SRQ/CCP3/FLT0RC0/AN4/CPS4/C2IN+/SCL/ SCK/P1D(1)RC1/AN5/CPS5/C12IN1-/SDA/SDI/P 1C(1)/CCP4RC2/AN6/CPS6/C12IN2-/P1D(1)/P2 B(1)/SDO(1)/MDCIN1 Note 1:Pin function is selectable via the APFCON0 or APFCON1 (L) f1824 /1828DS41419C-page 6 preliminary 2010-2011 Microchip Technology 2.