PRIMECENTER M1 19-inch Rack

1 User Manual - EnglishPRIMECENTER M1 19-inch RackRack System for PRIMERGY, PRIMEQUEST, BS2000, STORAGEM arch User Documentation Department would like toknow your opinion of this manual. Your feedback helpsus optimize our documentation to suit your individual free to send us your comments by e-mail to email: documentation according to DIN EN ISO 9001:2008To ensure a consistently high quality standard anduser-friendliness, this documentation was created tomeet the regulations of a quality management system which complies with the requirements of the standardDIN EN ISO 9001:2008. cognitas. Gesellschaft f r Technik-Dokumentation and TrademarksCopyright 2014 Fujitsu Technology Solutions rights subject to availability; right of technical modifications hardware and software names used are trademarks of their respective manufacturers.

2 The contents of this manual may be revised without prior notice. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual. No part of this manual may be reproduced in any form without the prior written permission of , Windows, Windows Server, and Hyper V are trademarks or registered trademarks of Microsoft Corporation in the USA and other and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the USA and other countries. Before reading this manualFor your safetyThis manual contains important information for safely and correctly using this read the manual before using this product.

3 Pay particular attention to the accompanying manual " safety notes and other important information" and ensure these safety notes are understood before using the product. Keep this manual and the manual " safety notes and other important information" in a safe place for easy reference while using this product. Radio interferenceThis product is a "Class A" ITE (Information Technology Equipment) as defined by the Voluntary Control Council for Interference by Information Technology Equipment (VCCI-A) of Japan. In a domestic environment this product may cause radio interference, in which case the user may be required to take appropriate measures. High safety useThis product has been designed and manufactured for general uses such as general office use, personal use, domestic use and normal industrial use.

4 It has not been designed or manufactured for uses which demand an extremely high level of safety and carry a direct and serious risk to life or body if such safety cannot be ensured. These uses include control of nuclear reactions in nuclear power plants, automatic airplane flight control, air traffic control, traffic control in mass transport systems, medical devices for life support, and missile guidance control in weapons systems (hereafter, "high safety use"). Customers should not use this product for high safety use unless measures are in place for ensuring the level of safety demanded of such use. Please consult the sales staff of Fujitsu if intending to use this product for high safety use.

5 Technology controlled by the Foreign Exchange and Foreign Trade Control Law of JapanDocuments produced by FUJITSU may contain technology controlled by the Foreign Exchange and Foreign Trade Control Law of Japan. Documents which contain such technology should not be exported from Japan or transferred to non-residents of Japan without first obtaining authorization in accordance with the above Current Standards This product conforms to harmonic current standard JIS C 61000-3-2. Contents1 Preface .. Group .. to find which information .. of the manual .. Conventions .. 152 Important Information .. Instructions .. on mounting the rack components.

6 Protection .. 203 Overview .. 214 Preparations .. the delivery unit .. off the PRIMECENTER M1 19-inch rack from the transport palette .. up the PRIMECENTER M1 19-inch rack .. the tilting protection .. the rack door .. mounting elements .. Cage Nuts .. Spring Nuts .. 325 Preparing to install rack components .. 33 Systems .. in the front 19-inch area .. support brackets .. in the rear 19-inch area .. in the expansion area .. rack Components .. cable routing with external cabling .. routing in the lower area .. routing through the top cover .. 516 Cable Management .. components of the cable management.

7 Cable management .. guide with cable clips .. and disconnecting cables .. Cables .. Cables .. Cables .. cables in the rack .. cables using a lateral cable management .. routing and strain relief for the built-in rack components in asymmetrical racks .. Guide with Cable Clips .. Connection .. 677 Power Distribution .. PDU brackets .. socket strips onto PDU kit 2 HU / 3 HU .. the socket strips .. A single-phase 5-way socket strip .. 10-way socket strip w/o plug .. A three-phase 15-way socket strip .. 24-way socket strip .. 8-way socket strip and assembly .. 10-way socket strip and assembly .. 97 strip extension 3 safety plugs and assembly.

8 4+1-way socket strip and assembly .. to the potential compensating system .. Supply via UPS .. 1118 Optional accessories .. kit .. the earthing cable .. the earthing cable .. the earthing kit .. Kit .. the connection kit .. the connection kit .. 1249 Appendix .. conversion .. 127 Contents 91 PrefaceThe data centers of today and tomorrow have to meet the continuously increasing requirements and demands of operators. Fujitsu has been offering well thought-out and permanently evolved rack systems for decades now. This in-depth experience with the development and operation of data centers and the associated close contact with operators is also reflected in the latest PRIMECENTER M1 19-inch rack family.

9 In addition to the proven racks with asymmetrical base frames for the unique, optimized Fujitsu cable management, the rack family has been supplemented by symmetrical racks in widths of 600 und 700 mm. By removing the side mounting locations the additional symmetrical version with a width of 600 mm requires less space within the data center. This makes it ideally suited for data centers, where minimal space requirements for the rack are an issue. Figure 1: Different variants of the PRIMECENTER M1 19-inch rack Constant changes in infrastructure requirements as well as increasing cost pressures on companies call for flexible and expandable solutions. The new PRIMECENTER M1 rack family of Fujitsu Technology Solutions offers precisely 10 Prefacethe flexibility you need to cover your current requirements.

10 Consequently, PRIMECENTER M1 racks can also be integrated in future concepts and thus offer long-term investment rack technology combines an entire IT infrastructure with rack servers, storage systems, power supply components as well as controls, such as consoles and switches, within the smallest data center footprint. The PRIMECENTER M1 racks can be expanded horizontally and blend into existing IT scenarios. They are based on the industry standards EIA-310-D, DIN41494 and IEC60297. The new PRIMECENTER M1 racks are available as asymmetrical and symmetrical versions. As a special feature the symmetrical version also has up to 4 vertical slots of 1 height unit for the installation of additional devices, switches.