SIMATIC LOGO! Manual - Siemens

1 W 22i 2 HTGPHHQ vyqy3 The following supplement is part of this documentation: No. Designation Drawing number Edition 1 Product information A5E00324307-01 07/2004 2eqf 2e 2 2h q 2s 2e 2 2 RVRVD2hEWHQPU2x g ( X2*2 2eq2 PHHI2E2 PHHQ , 2 2 2- 2( 2 dI TihIHSHEIeeHHEHfiSd1P 6ED1050-1AA00-0BE5 TihIHSHEIeeHHEHfiS---.. G G4019169 120982iLOGO! ManualA5E00228550-01 PrefaceDear customerWe thank you for purchasing LOGO! and congratulate you onyour decision. With LOGO!))

2 You have acquired a logic module thatmeets the stringent quality requirements of ISO ! can be used in many fields of applications. Due to its highfunctionality and yet easy operation the LOGO! offers you highlyefficient economies for almost any of this manualThis LOGO! Manual provides you with information about the crea-tion of circuit programs, about the installation and use of LOGO! 0BA4 devices and expansion modules, and about their compatibi-lity to the previous 0BA0-0BA3 versions (0 BAx are the last fourcharacters of the order number and differentiate the device se-ries).

3 LOGO! s place in information technologyThe wiring information in your LOGO! manualis also found in theLOGO! Product Info included with all devices. For further informa-tion on programming the LOGO! on your PC, with the PC in theOnline Help for LOGO! Soft !Soft Comfort is the programming software for PCs. It runsunder Windows , Linux , Mac OS X and helps you to get star-ted with LOGO! and to write, test, print out and archive your pro-grams, independent of the LOGO! .GuideWe have divided this Manual into 9 chapters: Getting started with LOGO!

4 LOGO! installation and wiring Programming LOGO! LOGO! functions Configuring LOGO! LOGO! program module (card) LOGO! software Applications AppendixLOGO! ManualA5E00228550-01iiValid range of this Manual The Manual applies to devices of the series compared to previous releases of the Manual LOGO! 24o was added. The digital module LOGO! DM 8 24R was added. The analog module LOGO! AM 2 PT100 was added. Description of changes and new features of the series differences compared to previous devices (0BA0 to 0BA3) Higher performance: faster execution times New program module (card) with more memory and know-howprotection, selectable at the parameters.

5 Display with background lighting and 4 x 12 features of the current devices (0BA4) You have 130 blocks available for creating the circuit program. You can select retentivity also for time functions. You can use the LOGO! cursor keys as inputs. You can use the special functions Shift register , Analog am-plifier , Analog value monitoring and Analog differentialtrigger . You can invert individual inputs. Six of the basic functions are expanded with four inputs. You can test your circuit program online using the PC. Parameters for certain functions can also be derived from ana-log values and counter values.

6 Counter: You can also use fast inputs (I5, I6).Additional supportAt our Internet address can quickly and easily find answers to your queries aboutLOGO!.You can reach Technical Support under:Phone:+49 (0)180 5050-222 Fax:+49 (0)180 ManualA5E00228550-01 Safety guidelinesThe notes in this user Manual are for your own personal safetyand for preventing damage to assets. You should read them care-fully and follow the instructions they give you. These notes arehighlighted with a warning triangle and are shown according to thedegree of hazard as follows:!

7 DangerWarns that death, serious harm to health or damage to assets will result ifthe respective precautionary measures are not taken.!WarningWarns that death, serious harm to health or damage to can result if therespective precautionary measures are not taken.!CautionWarns that harm to health or damage to assets can result if the respectiveprecautionary measures are not that material damage may occur if corresponding safety measuresare not your attention to particularly important information relating to theproduct and its handling, or to a part of the documentation requiring yourspecial personnelOnly skilled personnel should be allowed to start and operatethis device.

8 Qualified personnel in the sense of the information onsafety technology in this Manual are persons who are authorizedto commission, to ground and to tag circuits, equipment and sy-stems in accordance with safety regulations and ! ManualA5E00228550-01ivUse as intendedPlease note:!WarningThis device must always be used as intended for the applications de-scribed in the catalog and in the technical specifications, and only in com-bination with third-party devices or components approved or recom-mended by for the safe and proper operation of the product is its propertransportation, storage, installation and mounting, and careful operatorcontrol and !

9 Is a trademark of Siemens AG .Other designations in this documentation may represent trademarks, whoseuse by third parties for their own purpose my infringe the right of the Siemens AG 1996 to 2003 All rights reservedThe reproduction, distribution or use of this document or its contents is notpermitted without express written authority. Offenders will be liable fordamages. All rights reserved, especially for the granting of patents or of liabilityWe have examined the contents of this publication for agreement with thehardware and software described.

10 Nevertheless, discrepancies can not beruled out. Any liability and warranty for the accuracy of this information isexcluded. The data in this Manual are reviewed at regular intervals. Anycorrections required are included in the subsequent editions. Suggestionsfor improvement are ! ManualA5E00228550-01 ContentsPrefacei.. 1 Getting started with LOGO! 1.. 2 LOGO! installation and wiring11.. of the modular LOGO! 13.. setup13.. with different voltage classes14.. Installing/removing LOGO! 16.. rail mounting17.. the LOGO!