Supercapacitors FR Series - KEMET

1 1 KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 One world. One KEMETB enefits Wide range of temperature from 40 C to +85 C Maintenance free Maximum operating voltage: VDC Highly reliable against liquid leakage Lead-free and RoHS CompliantOverviewFR Series Supercapacitors , also known as Electric Double-Layer Capacitors (EDLCs), are intended for high energy storage have characteristics ranging from traditional capacitors and batteries. As a result, Supercapacitors can be used like a secondary battery when applied in a DC circuit.

2 These devices are best suited for use in low voltage DC hold-up applications such as embedded microprocessor systems with flash SeriesPart Number SystemFR0H104 ZFSeriesMaximum Operating VoltageCapacitance Code (F)Capacitance ToleranceEnvironmentalFR0H = VDCF irst two digits represent significant figures. Third digit specifies number of = 20/+80%F = Lead-free2 KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 Supercapacitors FR SeriesDimensions Millimeters d1 D MinimumH Maximum Minimumd2 (Terminal)

3 Part Number DHP KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 Supercapacitors FR SeriesPerformance CharacteristicsSupercapacitors should not be used for applications such as ripple absorption because of their high internal resistance (several hundred m to a hundred ) compared to aluminum electrolytic capacitors. Thus, its main use would be similar to that of secondary battery such as power back-up in DC circuit. The following list shows the characteristics of Supercapacitors as compared to aluminum electrolytic capacitors for power back-up and secondary BatteryCapacitorNiCdLithium IonAluminum ElectrolyticSupercapacitorBack-up ability Eco-hazardCd Operating Temperature Range 20 to +60 C 20 to +50 C 55 to +105 C 40 to +85 C (FR, FT)Charge Timefew hoursfew hoursfew secondsfew secondsCharge/Discharge Life Timeapproximately 500 timesapproximately 500 to 1,000 timeslimitless (*1)limitless (*1)

4 Restrictions on Charge/DischargeyesyesnonenoneFlow Solderingnot applicablenot applicableapplicableapplicableAutomatic Mountingnot applicablenot applicableapplicableapplicable (FM and FC Series )Safety Risksleakage, explosionleakage, combustion, explosion, ignitionheat-up, explosiongas emission (*2)(*1) Aluminum electrolytic capacitors and Supercapacitors have limited lifetime. However, when used under proper conditions, both can operate within a predetermined lifetime.(*2) There is no harm as it is a mere leak of water vapor which transitioned from water contained in the electrolyte (diluted sulfuric acid).

5 However, application of abnormal voltage surge exceeding maximum operating voltage may result in leakage and ApplicationsIntended Use (Guideline) Power Supply (Guideline)ApplicationExamples of EquipmentSeriesLong time back-up500 A and belowEmbedded memory backupDVD player, television, game console, set-top boxFR seriesMotor driverDVD player, printer, projector, camera4 KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 Supercapacitors FR SeriesEnvironmental ComplianceAll KEMET Supercapacitors are RoHS CompliantTable 1 Ratings & Part Number ReferencePart NumberMaximum Operating Voltage (VDC)Nominal CapacitanceMaximum ESR at 1 kHz ( )Maximum Current at 30 Minutes (mA)

6 Voltage Holding Characteristic Minimum (V)Weight (g)Charge System (F)Discharge System (F) numbers in bold type represent popularly purchased KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 Supercapacitors FR SeriesSpecificationsItemFR TypeTest Conditions (conforming to JIS C 5160-1)Category Temperature Range 40 C to +85 CMaximum Operating VDCC apacitanceRefer to Table 1 Refer to Measurement Conditions Capacitance Allowance+80%, 20%Refer to Measurement Conditions ESRR efer to Table 1 Measured at 1 kHz, 10 mA.

7 See also Measurement Conditions Current (30 minutes value)Refer to Table 1 Refer to Measurement Conditions SurgeCapacitance> 90% of initial ratingsSurge voltage:Charge:Discharge:Number of cycles: Series resistance:Discharge resistance: V30 seconds9 minutes 30 seconds1, F 560 F 300 F 240 F 150 F 56 F 30 F 15 0 70 2 CESR 120% of initial ratingsCurrent (30 minutes value) 120% of initial ratingsAppearanceNo obvious abnormalityCharacteristics in Different TemperatureCapacitancePhase 2 50% of initial valueConforms to 1:Phase 2:Phase 3:Phase 4:Phase 5:Phase 6:+25 2 C 25 2 C 40 2 C+25 2 C+70 2 C+25 2 CESR 400% of initial valueCapacitancePhase 3 30% of initial valueESR 700% of initial valueCapacitancePhase 5 200% of initial valueESRS atisfy initial ratingsCurrent (30 minutes value) CV (mA)CapacitancePhase 6 Within 20% of initial valueESRS atisfy initial ratingsCurrent (30 minutes value)Satisfy initial ratingsLead Strength (tensile)No terminal damageConforms to ResistanceCapacitanceSatisfy initial ratingsConforms to : Testing Time.

8 10 to 55 Hz6 hoursESRC urrent (30 minutes value)AppearanceNo obvious abnormalitySolderabilityOver 3/4 of the terminal should be covered by the new solderConforms to temp:Dipping time:+245 5 C5 mm from the bottom should be Heat ResistanceCapacitanceSatisfy initial ratingsConforms to temp:Dipping time:+260 10 C10 1 secondsESRC urrent (30 minutes value)AppearanceNo obvious mm from the bottom should be KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 Supercapacitors FR SeriesSpecifications cont V85 C V85 C FNegative polarityidentification markMaximumoperating voltageNominalcapacitanceDatecodeSerialn umberItemFR TypeTest Conditions (conforming to JIS C 5160-1)Temperature CycleCapacitanceSatisfy initial ratingsConforms to Condition:Number of cycles.

9 40 C Room temperature +85 C Room temperature5 cyclesESRC urrent (30 minutes value)AppearanceNo obvious abnormalityHigh Temperature and High Humidity ResistanceCapacitanceWithin 20% of initial valueConforms to : Relative humidity: Testing time: +40 2 C90 to 95% RH240 8 hoursESR 120% of initial ratingsCurrent (30 minutes value) 120% of initial ratingsAppearanceNo obvious abnormalityHigh Temperature LoadCapacitanceWithin 30% of initial valueConforms to : Voltage applied: Series protection resistance: Testing time: +85 2 CMaximum operating voltage0 1,000 +48 (+48/ 0) hoursESR< 200% of initial ratingsCurrent (30 minutes value)< 200% of initial ratingsAppearanceNo obvious abnormalitySelf Discharge Characteristics (Voltage Holding Characteristics)Voltage between terminal leads > VCharging conditionVoltage applied: Series resistance: Charging time: VDC (Terminal at the case side must be negative)0 24 hoursStorageLet stand for 24 hours in condition described below with terminals temperature: Relative humidity.

10 < 25 C< 70% RH7 KEMET Electronics Corporation Box 5928 Greenville, SC 29606 864-963-6300 S6016_FR 3/30/2017 Supercapacitors FR SeriesPackaging QuantitiesPart NumberBulk Quantity per BoxFR0H223ZF800 piecesFR0H473ZF400 piecesFR0H104ZF400 piecesFR0H224ZF300 piecesFR0H474ZF240 piecesFR0H105ZF90 piecesList of Plating & Sleeve TypeBy changing the solder plating from leaded solder to lead-free solder and the outer tube material of can-cased conventional supercapacitor from polyvinyl chloride to polyethylene terephthalate (PET), our supercapacitor is now even friendlier to the Iron + copper base + lead-free solder plating (Sn-1Cu)b.