TIP32C - STMicroelectronics

1 November 2006 Rev 21/88 TIP32 CPower transistorApplications Linear and swithing industrial equipmentDescriptionThe TIP32C is a silicon Epitaxial-base PNP power transistor in Jedec TO-220 plastic package. It is intented for use in medium power linear and switching complementary NPN type is TIP31C..Internal schematic codesPart numberMarking PackagePackingTIP32C TIP32 CTO-220 TubeAbsolute maximum ratingsTIP32C2/8 1 Absolute maximum ratingsTable maximum ratingsSymbolParameterValueUnitVCBOC ollector-base voltage (IE = 0)-100 VVCEOC ollector-emitter voltage (IB = 0) -100 VVEBOE mitte-base voltage (IC = 0) -5 VICC ollector current-3 AICMC ollector peak current (tP < 5ms)-5 AIBBase current-1 APTOTT otal dissipation at Tcase = 25 C Tamb = 25 C402 WWTstgStorage temperature-65 to 150 CTJMax.

2 Operating junction temperature150 CTIP32 CElectrical characteristics3/82 Electrical characteristics(Tcase = 25 C; unless otherwise specified)Table characteristicsSymbolParameterTest cut-off current (IB = 0)VCB = cut-off current (VBE = 0)VCB = cut-off current (IC = 0)VEB =-5V-1mAVCEO(sus(1)1. Pulsed duration = 300 ms, duty cycle sustaining voltage(IB = 0)IC = -30mA-100 VVCE(sat)(1)Collector-emitter saturation voltage IC = -3A _ IB = (on)(1)Base-emitter voltage IC = -3A_ VCE = (1)DC current gainIC = -1A VCE =-4 VIC = -3A _ VCE =-4V251050 Electrical characteristicsTIP32C4/8 Typical characteristic Figure operating areaFigure Curves Figure current gain Figure saturation voltage Figure saturation voltage TIP32 CPackage Mechanical Data5/83 Package Mechanical DataIn order to meet environmental requirements, ST offers these devices in ECOPACK packages.)

3 These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: Mechanical DataTIP32C6/8 MECHANICAL DATATIP32 CRevision History7/84 Revision HistoryTable historyDateRevisionChanges10-Oct-19991 Initial Release15-Nov-20062 The document has been reformattedTIP32C8/8 Please Read Carefully:Information in this document is provided solely in connection with ST products.

4 STMicroelectronics NV and its subsidiaries ( ST ) reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without ST products are sold pursuant to ST s terms and conditions of are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes noliability whatsoever relating to the choice, selection or use of the ST products and services described license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document.

5 If any part of thisdocument refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party productsor services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of suchthird party products or services or any intellectual property contained OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIEDWARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWSOF ANY JURISDICTION)

6 , OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOTRECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAININGAPPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVEGRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever.

7 Anyliability of and the ST logo are trademarks or registered trademarks of ST in various in this document supersedes and replaces all information previously ST logo is a registered trademark of STMicroelectronics . All other names are the property of their respective owners. 2006 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of