Transcription of UNISONIC TECHNOLOGIES CO., LTD
1 UNISONIC TECHNOLOGIES CO., LTD 2SB688 PNP SILICON TRANSISTOR 1 of 3 Copyright 2018 UNISONIC TECHNOLOGIES Co., Ltd SILICON PNP TRANSISTORS DESCRIPTION The UTC 2SB688 is a silicon PNP transistor in TO-3 metal case. It is intended for power switching circuits, series and shunt regulators, output stages and high fidelity amplifiers. ORDERING INFORMATION Ordering Number Pin Assignment Lead Free Halogen Free Package 1 2 3 Packing 2SB688L-x-T3P-T 2SB688G-x-T3P-T TO-3P B C E Tube Note: Pin Assignment: B: Base C: Collector E: Emitter MARKING 2SB688 PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO.
2 , LTD 2 of 3 ABSOLUTE MAXIMUM RATINGS (TA=25 C ,unless otherwise specified) PARAMETERS SYMBOL RATINGS UNITS Collector-Base Voltage VCBO -120 V Collector-Emitter Voltage VCEO -120 V Emitter Base Voltage VEBO -5 V Collector Current IC -10 A
3 Base Current IB -1 A Collector Power Dissipation (TC=25 C) PC 80 W Max. Operating Junction Temperature TJ +150 C Storage Temperature TSTG -40 ~ +200 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
4 ELECTRICAL CHARACTERISTICS (TA=25 C, unless otherwise specified) PARAMETER SYMBOLTEST CONDITIONS MINTYP MAX UNITC ollector Cut-off Current ICBO VCB = -120V, IE = 0 -10 A Emitter Cut-off Current IEBO VEB = -5V, IC = 0 -10 A Collector-Emitter Breakdown Voltage V(BR)CEO IC = -50mA, IB= 0 -120 V DC Current Gain hFE VCE = -5V, IC = -1A 55 160 Collector-Emitter Saturation Voltage VCE(sat) IC = -5A, IB = V Base-Emitter Voltage VBE VCE = -5A, IC= -5A V Transition Frequency fT VCE = -5A, IC= -1A 10 MHzCollector Output Capacitance Cob VCB = -10V, IE = 0, f=1 MHz 280 pF CLASSIFICATION OF hFE RANK R O RANGE 55 ~ 110 80 ~ 160 2SB688 PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO.
5 , LTD 3 of 3 TYPICAL CHARACTERISTICS 0240200 COLLECTOR POWER DISSIPATION, PC (W)AMBIENT TEMPERATURE, Ta ( C)PC - Ta8010020040601201604080(1)(2)(3)(4)(5)( 1)Ta=Tc INFINITEHEATSINK(2)300 300 2mm A1 HEAT SINK(3)200 200 2mm A1 HEAT SINK(4)100 100 2mm A1 HEAT SINK(5)NO HEAT SINK--12-10-14-4 COLLECTOR CURRENT, IC (A)COLLECTOR EMITTER VOLTAGE, VCE (V)-6IC - VCE0-2-8-100-2-4-6-8 COMMON EMITTERTC=25 C-200mA-50mA-400mA0mA-300mAIB= -20mA-100mA COLLECTOR-EMITTER SATURATIONVOLTAGE, VCE(sat) (V) CURRENT, IC (A)COLLECTOR EMITTER VOLTAGE, VCE (V)-300 SAFE OPERATING MAX. (PULSED) IC MAX(CONTINUOUS) SINGLE NONREPETITIVE PULSE TC=25 CCURVES MUST BE DERATEDLINEARLY WITH INCREASEIN MAX t=1ms t=10ms t=100ms t=500msDC OPERATIONTC=25 C-10 COLLECTOR CURRENT, IC (A)VCE(sat) - CTC=-25 CTC=100 CCOMMON EMITTERIC/IB= CURRENT GAIN, hFECOLLECTOR CURRENT, IC (A)hFE - CTC=25 CTC= -25 CCOMMON EMITTERVCE=-5V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein.
6 UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.
