User Manual - SMA CLUSTER CONTROLLER

1 SUNNY BOYUser ManualSMA CLUSTER CONTROLLERC lusterController-BA-en-16 | Version ProvisionsThe information contained in these documents is property of SMA Solar Technology AG. Anypublication, whether in whole or in part, requires prior written approval by SMA Solar TechnologyAG. Internal reproduction used solely for the purpose of product evaluation or other proper use isallowed and does not require prior WarrantyYou can download the current warranty conditions from the Internet at licensesThe licenses for the software modules used with this product can be found on the supplied trademarks are recognized, even if not explicitly identified as such.

2 Missing designations do notmean that a product or brand is not a registered BLUETOOTH word mark and logos are registered trademarks of Bluetooth SIG, Inc. and anyuse of such marks by SMA Solar Technology AG is under is a registered trademark of Schneider Electric and is licensed by theModbus Organization, Code is a registered trademark of DENSO WAVE and Pozidriv are registered trademarks of Phillips Screw is a registered trademark of Acument Global Technologies, Solar Technology AGSonnenallee 134266 NiestetalGermanyTel. +49 561 9522-0 Fax +49 561 : 4/25/2017 Copyright 2017 SMA Solar Technology AG.

3 All rights ProvisionsSMA Solar Technology AGUser ManualClusterController-BA-en-162 Table of Contents1 Information on this Interface of the CLUSTER Groups and User of the User Values Management Services of ContentsSMA Solar Technology AGUser and Save Groups of the Into or Out of the CLUSTER the Display the Display the User Interface the Date the Number the Time the Temperature for System on System System Time via the Setting the System the Characteristic Curve of the Irradiation Parameters for a Device the Parameters of an Individual the webconnect Function of the and Restoring the Device Configuration of the System the Measured Value System Data to a USB Data Table of ContentsSMA Solar Technology AGUser System Data to the Integrated FTP the Export Format for System or Deactivating the Integrated FTP the Integrated FTP Server via the Web Exporting System Data to an External FTP Server(FTP Push).

4 Or Deactivating the FTP Push the FTP Push Management and Replacing System Names or Device of SMA Energy Meters in the Off the Type, Serial Number and Firmware Version ofthe Addresses of the Off the IP Address of the CLUSTER Off the IP Address of the an the CLUSTER CONTROLLER or an the CLUSTER CONTROLLER in Sunny Data Transmission to Sunny Communication the Upload the Connection to Sunny the System Identifier for Sunny the Modbus or Updating the Modbus Profile and of ContentsSMA Solar Technology AGUser Manual5 ClusterController-BA-en-1613 Grid Management for Implementing Grid Management Service Parameters for Grid Management Services in for

5 Active Power Active Power Active Power Limitation at the for Reactive Power Reactive Power via the Setpoint "Reactive Power in%".. Reactive Power via the Setpoint "cos Phi".. Settings for Update (Recommended).. the Automatic Update for CLUSTER the Automatic Update for Connected SMA Out a Manual Update for CLUSTER a Manual Update for Connected SMA and SMA Grid for a Secure System the System the Device Password to the System on Loss of System a Inverters with SMA Grid Guard Up Access via the for Static the CLUSTER CONTROLLER for Static the Inverter for a Static Table of ContentsSMA Solar Technology AGUser the Proxy the DHCP the HTTP the NAT Port in the CLUSTER CONTROLLER or the Connected the CLUSTER

6 CONTROLLER via the User the CLUSTER of ContentsSMA Solar Technology AGUser Manual7 ClusterController-BA-en-161 Information on this document is valid for the SMA CLUSTER CONTROLLER (models "CLCON-10" and "CLCON-S-10")from hardware version A1 and from firmware version GroupThe tasks described in this document must only be performed by qualified persons. Qualifiedpersons must have the following skills: Training in the installation and configuration of IT systems Knowledge of how an inverter works and is operated Training in how to deal with the dangers and risks associated with installing and usingelectrical devices and installations Training in the installation and commissioning of electrical devices and installations Knowledge of the applicable standards and directives Knowledge of and compliance with this document and all safety InformationLinks to additional information can be found at.

7 Document titleDocument type"Replacement of SMA Devices in Systems with Communication Prod-ucts"Installation a hazardous situation which, if not avoided, will result indeath or serious injuryIndicates a hazardous situation which, if not avoided, can result indeath or serious injuryIndicates a hazardous situation which, if not avoided, can result inminor or moderate injuryIndicates a situation which, if not avoided, can result in propertydamageInformation that is important for a specific topic or goal, but is notsafety-relevantIndicates a requirement for meeting a specific goal1 Information on this DocumentSMA Solar Technology AGUser ManualClusterController-BA-en-168 SymbolExplanationDesired resultA problem that might Display texts Elements on a user interface Terminals Elements to be selected Elements to be entered The value can be found inthe field Energy.

8 Select Settings. Enter 10 in the fieldMinutes.> Connects several elements to beselected Select Settings > Date.[Button][Key] Button or key to be selected orpressed Select [Next]. designationDesignation in this documentLarge-scale PV power plantPV systemPV inverterInverterSMA CLUSTER ControllerCluster ControllerSMA Energy MeterEnergy Meter1 Information on this DocumentSMA Solar Technology AGUser UseThe CLUSTER CONTROLLER is a device for monitoring and controlling SMA devices with Speedwire/ webconnect interfaces in decentralized PV systems and large-scale PV power plants.

9 TheCluster CONTROLLER model "CLCON-S-10" monitors up to 25 SMA devices with Speedwire/ webconnect interface. The CLUSTER CONTROLLER model "CLCON-S-10" monitors up to 75 SMAdevices with Speedwire/ webconnect CLUSTER CONTROLLER is an ITE class A device as per EN 55022 and is designed for industrial product is designed for indoor use this product only in accordance with the information provided in the enclosed documentationand with the locally applicable standards and directives. Any other application may causepersonal injury or property to the product, changes or modifications, are only permitted with the express writtenpermission of SMA Solar Technology AG.

10 Unauthorized alterations will void guarantee andwarranty claims and in most cases terminate the operating license. SMA Solar Technology AGshall not be held liable for any damage caused by such use of the product other than that described in the Intended Use section does not qualify as theintended enclosed documentation is an integral part of this product. Keep the documentation in aconvenient place for future reference and observe all instructions contained type label must remain permanently attached to the InformationThis section contains safety information that must be observed at all times when working on or withthe prevent personal injury and property damage and to ensure long-term operation of the product.