Zener Diodes - Vishay Intertechnology

How to Select the Right MOSFET for Power Factor …

VISHAY SILICONIX Power MOSFETs Application Note - AN844 How to Select the Right MOSFET for Power Factor Correction Applications APPLICATION NOTE Revision: 03-Jun-13 1 Document Number: 65677

  Applications, Power, Factors, Correction, For power factor correction applications

Automotive P-Channel 60 V (D-S) 175 °C MOSFET

SQ7415AEN www.vishay.com Vishay Siliconix S13-1891, Rev. C, 26-Aug-13 1 Document Number: 67042 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  Vishay

Transient Voltage Suppressors (TVS) for …

Transient Voltage Suppressors (TVS) for Automotive Electronic Protection www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88490

  Electronic, Vishay, Automotive, Voltage, Suppressor, Transient, Transient voltage suppressors, For automotive electronic

Power Metal Strip Resistors, Low Value (down to …

WSR High Power www.vishay.com Vishay Dale Revision: 11-Jul-2018 1 Document Number: 31059 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  High, Power, Value, Metal, Strips, Vishay, Resistor, Power metal strip resistors, Low value, High power www

Resistive Products Power Dissipation in High …

Document Number: 53048 www.vishay.com Revision: 29-Oct-09 1 VISHAY SFERNICE Resistive Products Application Note Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays

  Product, High, Power, Precision, Vishay, Resistive, Resistive products power dissipation in high, Dissipation, Power dissipation in high precision

Vishay Semiconductors

VCUT0505B-HD1 www.vishay.com Vishay Semiconductors Rev. 2.2, 16-May-17 1 Document Number: 81852 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  Vishay, Semiconductors, Vishay semiconductors, Com vishay semiconductors

RF PIN Diodes - Single in DO-35 (DO-204AH) - Vishay

Legal Disclaimer Notice www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

  Vishay, Diode, Pin diodes

Small Signal Switching Diodes, High Voltage

BAV17, BAV18, BAV19, BAV20, BAV21 www.vishay.com Vishay Semiconductors Rev. 1.9, 12-Jul-17 3 Document Number: 85543 For technical questions within your region ...

  Vishay, Diode

High Precision Wraparound - Wide Ohmic Value …

P www.vishay.com Vishay Sfernice Revision: 23-Feb-18 1 Document Number: 53017 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  High, Value, Precision, Vishay, Wide, Hicom, High precision wraparound wide ohmic value, Wraparound, Com vishay

Aluminum Electrolytic Capacitors Radial Standard …

038 RSU www.vishay.com Vishay BCcomponents Revision: 28-Feb-17 1 Document Number: 28309 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

  Capacitors, Vishay, Aluminum, Radial, Electrolytic, Aluminum electrolytic capacitors radial

Small Signal Fast Switching Diode - Vishay Intertechnology

IF = 100 mA VF 1.2 V Leakage current VR = 20 V IR 25 nA VR = 75 V IR 5 VR = 100 V IR 100 μA VR = 20 V, Tj = 150 °C IR 50 Diode capacitance VF = VR = 0 V CD 4pF Voltage rise when switching ON Tested with 50 mA pulses, tp = 0.1 μs, rise time < 30 ns, fp = (5 to 100) kHz Vfr 2.5 V Reverse recovery time IF = 10 mA, iR = 1 mA, VR = 6 V, RL = 100 ...

  Vishay, Vishay intertechnology, Intertechnology

Data Sheet ADP7142 - Analog Devices

Oct 18, 2021 · Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 µF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point

  Devices, Analog devices, Analog

XA CONNECTOR XA CONNECTOR

Note: 1. The above figure is the figure viewed from the connector mounting side . 2. Tolerances are non-cumulative: ±0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 PC board layout and Assembly layout

G5V-1 - Omron

G5V-1 Low Signal Relay G 5 V-1 Characteristics Contact resistance *1 100 mΩ max. Note: The values here are initial values. *1. Measured with 10 mA at 1 VDC with a voltage drop method. *2. Measured with a 500 VDC megohmmeter between coil and contacts and a 250 VDC megohmmeter between contacts with the same polarity applied to

MMBZ5221BLT1 - Zener Voltage Regulators - ON …

mmbz5268blt1g 81u 77.90 82 86.10 1.5 330 2000 0.25 0.1 62 MMBZ5270BLT1G 81W 86.45 91 95.55 1.4 400 2300 0.25 0.1 69 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.

LTC1922-1 Modulated Full-Bridge Controller

LTC1922-1 2 SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS Input Supply UVLO Undervoltage Lockout Measured on VCC 10.25 10.7 V UVHY UVLO Hysteresis Measured on VCC 3.8 4.2 V ICCST Start-Up Current VCC = VUVLO – 0.3V 145 250 µA ICCRN Operating Current 47 mA VSHUNT Shunt Regulator Voltage Current Into VCC = 10mA 10.2 10.8 V …