SBOS068C - Texas Instruments

1 FEATURES SINGLE-SUPPLY OPERATION RAIL-TO-RAIL OUTPUT (within 3mV) micropower : IQ = 20 A/ amplifier microSIZE PACKAGES LOW OFFSET VOLTAGE: 125 V max SPECIFIED FROM VS = to SINGLE, DUAL, AND QUAD VERSIONSOPA336 OPA2336 OPA4336 SINGLE-SUPPLY, microPowerCMOS OPERATIONAL AMPLIFIERS microAmplifier SeriesAPPLICATIONS BATTERY-POWERED Instruments PORTABLE DEVICES HIGH-IMPEDANCE APPLICATIONS PHOTODIODE PRE-AMPS PRECISION INTEGRATORS MEDICAL Instruments TEST EQUIPMENTDESCRIPTIONOPA336 series micropower CMOS operational amplifiersare designed for battery-powered applications.

2 Theyoperate on a single supply with operation as low as output is rail-to-rail and swings to within 3mV of thesupplies with a 100k load. The common-mode rangeextends to the negative supply ideal for single-supplyapplications. Single, dual, and quad versions have identicalspecifications for maximum design addition to small size and low quiescent current(20 A/ amplifier ), they feature low offset voltage(125 V max), low input bias current (1pA), and high open-loop gain (115dB). Dual and quad designs featurecompletely independent circuitry for lowest crosstalk andfreedom from packages are the tiny SOT23-5 surface mountand SO-8 surface-mount.

3 OPA2336 come in the miniatureMSOP-8 surface-mount, SO-8 surface-mount, and DIP-8packages. The OPA4336 package is the space-savingSSOP-16 surface-mount. All are specified from 40 C to +85 C and operate from 55 C to +125 macromodel is available for download (at )for design JANUARY 1997 REVISED JANUARY DATA information is current as of publication conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all 1997-2005, Texas Instruments IncorporatedPlease be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexas Instruments semiconductor products and disclaimers thereto appears at the end of this data trademarks are the property of their respective + InOutV +InOPA336 SOT23-512348765 NCV+OutputNCNC In+InV OPA336SO-8NC = No Connection12348765V+Out B In B+In BOut A In A+In AV OPA2336 DIP-8, SO-8.

4 MSOP-8AB12345678161514131211109 Out D In D+In DV +In C In COut CNCOut A In A+In AV++In B In BOut BNCOPA4336 ADBCSSOP-16NC = No ConnectionOPA336, 2336, (2)OPA336 NASOT23-5 DBVA36(2)OPA336 NJSOT23-5 DBVJ36 OPA336 USO-8 Surface-MountDOPA336 UOPA336 UASO-8 Surface-MountDOPA336 UAOPA336 UJSO-8 Surface-MountDOPA336 UJDualOPA2336 EMSOP-8 Surface-MountDGKB36(2)OPA2336 EAMSOP-8 Surface-MountDGKB36(2)OPA2336 PDIP-8 POPA2336 POPA2336 PADIP-8 POPA2336 PAOPA2336 USO-8 Surface-MountDOPA2336 UOPA2336 UASO-8 Surface-MountDOPA2336 UAQuadOPA4336 EASSOP-16 Surface-MountDBQOPA4336 EANOTES: (1) For the most current package and ordering information, see the package option addendum at the end of this data sheet.

5 (2) Grade will be marked onthe INFORMATION(1)ELECTROSTATICDISCHARGE SENSITIVITYThis integrated circuit can be damaged by ESD. TexasInstruments recommends that all integrated circuits be handledwith appropriate precautions. Failure to observe proper han-dling and installation procedures can cause damage can range from subtle performance degrada-tion to complete device failure. Precision integrated circuitsmay be more susceptible to damage because very smallparametric changes could cause the device not to meet itspublished Voltage.

6 Input Terminals, Voltage(2).. (V ) to (V+) + (2).. 10mAOutput Short-Circuit(3).. ContinuousOperating Temperature .. 55 C to +125 CStorage Temperature .. 55 C to +125 CJunction Temperature .. 150 CLead Temperature (soldering, 10s) .. 300 CESD Rating:Charged Device Model, OPA336 NJ and UJ only (CDM)(4).. 1000 VHuman Body Model (HBM)(4).. 500 VMachine Model (MM)(4).. 100 VNOTES: (1) Stresses above these ratings may cause permanent to absolute maximum conditions for extended periods maydegrade device reliability. These are stress ratings only.

7 Functional opera-tion of the device at these conditions, or beyond the specified operatingconditions, is not implied. (2) Input terminals are diode-clamped to the powersupply rails. Input signals that can swing more than beyond the supplyrails should be current-limited to 10mA or less. (3) Short-circuit to ground,one amplifier per package. (4) OPA336 NJ and UJ have been tested to CDMof 1000V. All other previous package versions have been tested using HBMand MM. Results are MAXIMUM RATINGS(1)OPA336, 2336, CHARACTERISTICS: VS = to limits apply over the specified temperature range, TA = 40 C to +85 TA = +25 C, VS = +5V, and RL = 25k connected to VS/2, unless otherwise , UAOPA336N, UOPA2336EA, PA, UAOPA2336E, P, UOPA4336 EAOPA336NJ, UJPARAMETERCONDITIONMINTYP(1)

8 MAXMINTYPMAXMINTYP MAX UNITSOFFSET VOLTAGEI nput Offset VoltageVOS 60 125 500 500 2500 Vvs TemperaturedVOS/dT V/ Cvs Power SupplyPSRRVS = to V/VOver TemperatureVS = to V/VChannel Separation, V/VINPUT BIAS CURRENTI nput Bias CurrentIB 1 10 pAOver Temperature 60 pAInput Offset CurrentIOS 1 10 pANOISEI nput Voltage Noise, f = to 10Hz3 Vp-pInput Voltage Noise Density, f = 1kHz en40 nV/ HzCurrent Noise Density, f = 1kHzin30 fA/ HzINPUT VOLTAGE RANGEC ommon-Mode Voltage RangeVCM (V+) 1 VCommon-Mode Rejection RatioCMRR < VCM < (V+) 1V809076867686dBOver Temperature < VCM < (V+) 1V767474dBINPUT IMPEDANCED ifferential1013 || 2 || pFCommon-Mode1013 || 4 || pFOPEN-LOOP GAINOpen-Loop Voltage GainAOLRL = 25k , 100mV < VO < (V+) 100mV10011590 90 dBOver TemperatureRL = 25k , 100mV < VO < (V+) 100mV1009090dBRL = 5k , 500mV < VO < (V+) 500mV90106 dBOver TemperatureRL = 5k , 500mV < VO < (V+)

9 500mV90 dBFREQUENCY RESPONSEGain-Bandwidth ProductGBWVS = 5V, G = 1100 kHzSlew RateSRVS = 5V, G = V/ sOverload Recovery TimeVIN G = VS100 sOUTPUTV oltage Output Swing from Rail(2)RL = 100k , AOL 70dB3 mVRL = 25k , AOL 90dB20100 mVOver TemperatureRL = 25k , AOL 90dB100 mVRL = 5k , AOL 90dB70500 mVOver TemperatureRL = 5k , AOL 90dB500 mVShort-Circuit CurrentISC 5 mACapacitive Load DriveCLOADSee Text pFPOWER SUPPLYS pecified Voltage VMinimum Operating VQuiescent Current (per amplifier )IQIO = 02032 2338 AOver TemperatureIO = 036 42 ATEMPERATURE RANGES pecified Range 40+85 COperating Range 55+125 CStorage Range 55+125 CThermal Resistance JASOT-23-5 Surface-Mount200 C/WMSOP-8 Surface-Mount150 C/WSO-8 Surface-Mount150 C/WDIP-8100 C/WSSOP-16 Surface-Mount100 C/WDIP-1480 C/W Specifications same as OPA2336E, P, : (1) VS = +5V.

10 (2) Output voltage swings are measured between the output and positive and negative power-supply , 2336, CHARACTERISTICSAt TA = +25 C, VS = +5V, and RL = 25k connected to VS/2, unless otherwise GAIN/PHASE vs FREQUENCY1100806040200 20 Voltage Gain (dB)0 45 90 135 180 Phase ( )Frequency (Hz)101001k10k100k1MG SHORT-CIRCUIT CURRENT vs SUPPLY VOLTAGES upply Voltage (V)Short-Circuit Current (mA) 6 5 4 3 2 +ISC ISCPOWER-SUPPLY and COMMON-MODEREJECTION RATIO vs FREQUENCY100806040200 PSRR, CMRR (dB)Frequency (Hz)1101001k10k100kCMRRPSRRSHORT-CIRCUIT CURRENT vs TEMPERATURET emperature ( C)Short-Circuit Current (mA)876543210 75 50 250255075100125VS = + = +5V ISC+ISC+ISC ISCQUIESCENT CURRENT vs SUPPLY VOLTAGES upply Voltage (V)Quiescent Current ( A) AmplifierQUIESCENT CURRENT vs TEMPERATURET emperature ( C)Quiescent Current ( A)302520151050 75 50 250255075100125VS = + = +5 VPer AmplifierOPA336, 2336, CHARACTERISTICS (Cont.)