TECHNICAL DATA SHEET - PPG Industries

1 369-9201 Protec hardeners and activated products contain isocyanate and therefore particular safety precautions must be taken; please refer to MSDS for full health and safety UAE Urethane Additive for EnamelsAdd 250mL of 369-9201 to 4L of 304 Protec Equipment EnamelAdd 500mL of 369-9201 to 4L of 342 Protec Spraying EnamelAdd 500mL of 369-9201 to 4L of 363 Protec Automotive EnamelThe addition of 369-9201 converts the enamel into a 2-pack urethane enamel containing isocyanate, therefore all precautions related to the handling, mixing and spraying of isocyanates must be adhered to; please refer to MSDS for full health and safety refer to Material Safety Data Sheets (MSDS) for full Health and Safety details, as well as product can of 369-9201 will shorten the pot life - do not mix excess material.

2 Containers of 369-9201 must be kept firmly sealed as the product deteriorates rapidly upon exposure to air. If using only portions of the container, reseal thoroughly after use and plan to use the remainder as soon as DATA SHEETAdd 369-9201 as per the above recommended volumes. Stir 369-9201 thoroughly into the enamel component prior to adding reducer. All other details, including reducer addition and product application remain as per the relevant enamel TECHNICAL data RATIO BY VOLUME369-9201 PROTEC Urethane Additive for Enamels (UAE) is a high performance aliphatic isocyanate resin solution used as an additive in 363 Protec Automotive Enamel, 342 Protec Spraying Enamel and 304 Protec Equipment Enamel to improve drying, hardness, chemical resistance, gloss and DESCRIPTIONPRODUCTPRECAUTIONSA fter use, clean all equipment thoroughly with cleaning solvent or AND SAFETYEQUIPMENT CLEANINGTECHNICAL DATA SHEETPage 1 of 23/06/2015 This product is for professional use only.

3 The information given in this SHEET is for guidance only. Any person using the product without first making further inquiries as to the suitability of the product for the intended purpose does so at his or her own risk and we can accept no liability for the performance of the product or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of such use. The information contained in this SHEET is liable to modification from time to time in the light of experience and our policy of continuous product times quoted are average times at 25 C/77 F. Film thickness, humidity and shop temperature can all affect drying Pty Ltd. 97 105 Bedford StreetGillman, 5013 AustraliaEMERGENCY RESPONSE NUMBER, Australia: 1800 883 254 Protec Pty Ltd. 5 Monahan Rd, Mt WellingtonAuckland, New ZealandEMERGENCY RESPONSE NUMBER, New Zealand: 0800 000 096 Protec and the Protec Logo are registered trademarks of Protec Pty 2 of 23/06/2015