TL07xx Low-Noise JFET-Input Operational Amplifiers ...

1 TL07xx Low-Noise FET- input Operational Amplifiers1 Features High slew rate: 20 V/ s (TL07xH, typ) Low offset voltage: 1 mV (TL07xH, typ) Low offset voltage drift: 2 V/ C Low power consumption: 940 A/ch (TL07xH, typ) Wide common-mode and differentialvoltage ranges Common-mode input voltage rangeincludes VCC+ Low input bias and offset currents Low noise:Vn = 18 nV/ Hz (typ) at f = 1 kHz Output short-circuit protection Low total harmonic distortion: (typ) Wide supply voltage: V to 20 V, V to 40 V2 Applications Solar energy: string and central inverter Motor drives: AC and servo drive control and power stage modules Single phase online UPS Three phase UPS Pro audio mixers Battery test equipment3 DescriptionThe TL07xH (TL071H, TL072H, and TL074H) family of devices are the next-generation versions of the industry-standard TL07x (TL071, TL072, and TL074) devices.

2 These devices provide outstanding value for cost-sensitive applications, with features including low offset (1 mV, typical), high slew rate (20 V/ s), and common-mode input to the positive supply. High ESD ( kV, HBM), integrated EMI and RF filters, and operation across the full 40 C to 125 C enable the TL07xH devices to be used in the most rugged and demanding Information PART NUMBER(1)PACKAGEBODY SIZE (NOM)TL071xPDIP (8) mm mmSC70 (5) mm mmSO (8) mm mmSOIC (8) mm mmSOT-23 (5) mm mmTL072xPDIP (8) mm mmSO (8) mm mmSOIC (8) mm mmSOT-23 (8) mm mmTSSOP (8) mm mmTL072 MCDIP (8) mm mmCFP (10) mm mmLCCC (20) mm mmTL074xPDIP (14) mm mmSO (14) mm mmSOIC (14) mm mmSOT-23 (14) mm mmSSOP (14) mm mmTSSOP (14) mm mmTL074 MCDIP (14)

3 Mm mmCFP (14) mm mmLCCC (20) mm mm(1)For all available packages, see the orderable addendum at the end of the data sheet.+ + IN+IN OUTIN+IN OUTTL072 (each amplifier)TL074 (each amplifier)TL071 OFFSET N1 OFFSET N2 Copyright 2017, Texas Instruments IncorporatedLogic SymbolsTL071, TL071H, TL071A, TL071 BTL072, TL072H, TL072A, TL072 BTL074, TL074H, TL074A, TL074B, TL072M, TL074 MSLOS080R SEPTEMBER 1978 REVISED JUNE 2021An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION of Contents1 Revision Pin Configuration and Absolute Maximum Ratings: TL07xH.

4 Absolute Maximum Ratings: All Devices Except ESD Ratings: TL07xH .. ESD Ratings: All Devices Except Recommended Operating Conditions: TL07xH .. Recommended Operating Conditions: All Devices Except Thermal Information for Single Channel: TL071H .. Thermal Information: Thermal Information for Dual Channel: TL072H .. Thermal Information: Thermal Information: TL072x (cont.).. Thermal Information for Quad Channel: TL074H .. Thermal Information: Thermal Information: TL074x (cont).. Thermal Information: TL074x (cont).. Thermal Electrical Characteristics: TL07xH .. Electrical Characteristics: TL071C, TL072C, Electrical Characteristics: TL071AC, TL072AC, Electrical Characteristics: TL071BC, TL072BC, Electrical Characteristics: TL071I, TL072I, Electrical Characteristics: TL071M, Electrical Characteristics: Switching Characteristics: Switching Characteristics: TL07xC, TL07xAC, TL07xBC, Typical Characteristics: Typical Characteristics.

5 All Devices Except Parameter Measurement Detailed Functional Block Feature Device Functional Application and Application Typical Unity Gain System Power Supply Layout Layout Device and Documentation Receiving Notification of Documentation Support Electrostatic Discharge Mechanical, Packaging, and Orderable Revision HistoryNOTE: Page numbers for previous revisions may differ from page numbers in the current from Revision Q (June 2021) to Revision R (June 2021)Page Deleted preview note from SOIC (8), SOT-23 (8) and TSSOP (8) packages throughout the data Added ESD information for Added IQ spec for from Revision P (November 2020) to Revision Q (June 2021)Page Deleted VSSOP (8)

6 Package from the Device Information Added DBV, DCK, and D packages to TL071H in Pin Configuration and Functions Deleted DGK package from TL072x in Pin Configuration and Functions Deleted tables with duplicate information from the Specifications Added D, DCK, and DBV package thermal information in Thermal Information for Single Channel: TL071H Added D, DDF, and PW package thermal information in Thermal Information for Dual Channel: TL072H Added IB and IOS specification for single channel DCK and DBV Added IQ spec for , TL071H, TL071A, TL071 BTL072, TL072H, TL072A, TL072 BTL074, TL074H, TL074A, TL074B, TL072M, TL074 MSLOS080R SEPTEMBER 1978 REVISED JUNE Document FeedbackCopyright 2021 Texas Instruments IncorporatedProduct Folder Links.

7 TL071 TL071H TL071A TL071B TL072 TL072H TL072A TL072B TL074 TL074H TL074A TL074B TL072M TL074M Deleted Related Links section from the Device and Documentation Support from Revision O (October 2020) to Revision P (November 2020)Page Added SOIC and TSSOP package thermal information in Thermal Information for Quad Channel: TL074H section ..15 Added Typical Characteristics:TL07xH section in Specifications from Revision N (July 2017) to Revision O (October 2020)Page Updated the numbering format for tables, figures, and cross-references throughout the Features of TL07xH added to the Features Added link to applications in the Applications Added TL07xH in the Description Added TL07xH device in the Device Information Added SOT-23 (14), VSSOP (8), SOT-23 (8), SC70 (5), and SOT-23 (5)

8 Packages to the Device Information Added TSSOP, VSSOP and DDF packages to TL072x in Pin Configuration and Functions Added DYY package to TL074x in Pin Configuration and Functions Removed Table of Graphs from the Typical Characteistics Deleted reference to obsolete documentation in Layout Guidelines Removed Related Documentation from Revision M (February 2014) to Revision N (July 2017)Page Updated data sheet text to latest documentation and translation Added TL072M and TL074M devices to data sheet ..1 Rewrote text in Description section ..1 Changed TL07x 8-pin PDIP package to 8-pin CDIP package in Device Information table.

9 1 Deleted 20-pin LCCC package from Device Information table ..1 Added 2017 copyright statement to front page Deleted TL071x FK (LCCC) pinout drawing and pinout table in Pin Configurations and Functions section ..5 Updated pinout diagrams and pinout tables in Pin Configurations and Functions section ..5 Deleted differential input voltage parameter from Absolute Maximum Ratings table ..12 Deleted table notes from Absolute Maximum Ratings table ..12 Added new table note to Absolute Maximum Ratings table ..12 Changed minimum supply voltage value from 18 V to V in Absolute Maximum Ratings Changed maximum supply voltage from 18 V to 36 V in Absolute Maximum Ratings Changed minimum input voltage value from 15 V to VCC V in Absolute Maximum Ratings Changed maximum input voltage from 15 V to VCC + 36 V in Absolute Maximum Ratings Added input clamp current parameter to Absolute Maximum Ratings table.

10 12 Changed common-mode voltage maximum value from VCC+ 4 V to VCC+ in the Recommended Operating Conditions Changed devices in Recommended Operating Conditions table from TL07xA and TL07xB to TL07xAC and TL07xBC ..13 Added TL07xI operating free-air temperature minimum value of 40 C to Recommended Operating Conditions table ..13 Added U (CFP) package thermal values to Thermal Information: TL072x (cont.) Added W (CFP) package thermal values to Thermal Information: TL074x (cont.) Added Figure 6-59 to Typical Characteristics Added second Typical Application section application curves ..41 Reformatted document references in Layout Guidelines section.