Example: dental hygienist

User’s Guide - Brother

Introduction Safety Precautions General Precautions Entering Text and Symbols Printing Labels Saving Label Files With your PT-90, you can create labels for any application. Depending on the location, material, and environmental conditions, Select from the many frames, character sizes and styles to Warning the label may unpeel or become irremovable, the color of the label X Switching Upper Case/Lower Case X Entering Accented Characters X Text Preview X Memory ( + ). design beautiful custom labels. In addition, the variety of Follow these guidelines to avoid the risk of fire, burn, may change or be transferred to other objects. Before applying the You can preview the text before printing. label, check the environmental condition and the material. You can save your original labels on to your machine. Up to tape cartridges available allows you to print labels with injury, electric shock, damage, overheating, abnormal - /. Do not use the P-touch labeler in any way or for any purpose not three labels can be saved and recalled for printing at a later different widths and exciting colors.

ELECTRONIC LABELING SYSTEM User’s Guide PT 90PPT 90T 90 English / Español Introduction With your PT-90, you can create labels for any application. Select from the many frames, character sizes and styles to

Tags:

  Guide, User, User s guide, Brother

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of User’s Guide - Brother

1 Introduction Safety Precautions General Precautions Entering Text and Symbols Printing Labels Saving Label Files With your PT-90, you can create labels for any application. Depending on the location, material, and environmental conditions, Select from the many frames, character sizes and styles to Warning the label may unpeel or become irremovable, the color of the label X Switching Upper Case/Lower Case X Entering Accented Characters X Text Preview X Memory ( + ). design beautiful custom labels. In addition, the variety of Follow these guidelines to avoid the risk of fire, burn, may change or be transferred to other objects. Before applying the You can preview the text before printing. label, check the environmental condition and the material. You can save your original labels on to your machine. Up to tape cartridges available allows you to print labels with injury, electric shock, damage, overheating, abnormal - /. Do not use the P-touch labeler in any way or for any purpose not three labels can be saved and recalled for printing at a later different widths and exciting colors.

2 Odors or smoking. described in this Guide . Doing so may result in accidents or damage time. You can also edit and overwrite the stored label. Read this manual carefully before starting and keep the Do not use the machine in places of high humidity such as the machine. Upper case ( ON) Lower case ( OFF) Accented Characters Accented Characters manual in a handy place for future reference. bathrooms. The LCD shows the whole text and the label length (inch/. Use only Brother M tapes with this machine. Do not use tapes that Do not swallow the cutter stopper. do not have the mark. A a mm), then returns to the original text. [File]. The contents of this Guide and the specifications of this Do not get the machine wet, such as by handling it with wet hands product are subject to change without notice. Only use a soft, dry cloth to clean the labeler; never use alcohol or Only the text can be previewed, not the style, size, or spilling beverages on to it.

3 C c ELECTRONIC LABELING SYSTEM Do not disassemble or modify the P-touch labeler/batteries. other organic solvents. underline/frame or any additional features. Use a soft wipe to clean the print head; never touch the print head. D d To Save: [Save]. FCC NOTICE Do not use metallic objects, such as tweezers or a metallic pen, Do not put any foreign objects into the tape exit slot, etc. X Feeding (Tape Feed). when changing the batteries. X Entering Numbers E e PT 90 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not throw the batteries into fire or expose to heat. Remove batteries immediately and stop using the machine if you notice abnormal odor, heat, discoloration, deformation or anything Do not place the P-touch labeler/battery in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures ( on the dashboard or in the back of your car), high humidity, or dusty locations.

4 G. I. g i +. The machine will feed " of tape, which may be needed unusual while using or storing it. To Print: [Print]. This equipment has been tested and found to comply with the limits for Do not apply excessive pressure to the cutter lever. Num Lock ON Num Lock OFF when installing a new tape cassette. a Class B digital device, pursuant to Part 15 of the FCC Rules. These K k Caution user 's Guide limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and Follow these guidelines to avoid personal injury, liquid leakage, burn and heat. Do not try to print if the cassette is empty; it will damage the print head. Do not pull the tape while printing or feeding; it will damage the tape L. N. l n X Printing used in accordance with the instructions, may cause harmful and machine. interference to radio communications.

5 However, there is no guarantee Do not touch the edge of the cutter near the print head. Any data stored in memory will be lost due to failure or repair of the O o To Open: [Open]. English / Espa ol that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television Remove the batteries if you do not intend to use P-touch labeler for an extended period of time. P-touch labeler, or if the battery expires. X Making a Two Line Label R r To prevent damage to the tape, do not touch the cutter reception, which can be determined by turning the equipment off and on, lever while the message Printing or Feeding is When power is disconnected for more than three minutes, all text, the user is encouraged to try to correct the interference by one or more format settings and any text files stored in the memory will be 1. Enter the text for the first line and press . S s displayed.

6 Of the following measures: To cut off the label, push in the tape cutter lever on the cleared. 2. Enter the text for the second line and press . T t Reorient or relocate the receiving antenna. Do not use old and new batteries together or mix alkaline batteries upper-left corner of the machine. Increase the separation between the equipment and receiver. with other type batteries, or set the positive and negative end in the U u NOTE. Consult the dealer or an experienced radio/TV technician for help. Peel the printed label from backing and apply the label. wrong position. Do not press after the second line; otherwise Line Y y If you try to store a label when there is already a label Important Do not drop or hit the P-touch labeler. Limit! error message will appear. X Making Copies ( + ). Changes or modifications not expressly approved by Brother Do not press hard on the LCD display. Use either 3/8" (9mm) or 1/2" (12mm) wide tape for two Z z stored to that number, a message Overwrite?

7 Will appear. Industries, Ltd. could void the user 's authority to operate the equipment. Do not put your finger between the covers when you close the back You can print up to 9 copies of each label. line text. Press to save your new label. Press to cancel. Printed in China cover. To cancel operations, press . LW4039001 Display Label image The order of accented characters differs by the selected [Copies]. LCD language. X To Clear ( + ) Symbols Power Supply and Tape Cassette By pressing , the letters will be deleted one by one. The following symbols are available. You can also select the number of copies by entering with X Entering Symbols the Number Keys ~ . 1 2 3 4. Basic Cassette Example: Entering X Removing the Label Backing cover Cutter's To delete all text and settings : This machine is equipped with a peeler that allows you to 01 . , : ; " '. Tape Guide [Pictograph] easily remove the backing from labels. Print head edge 02 @ - & ~ _ \ /.

8 + [Txt&Format] 1. Insert the label, with the printed surface facing down, 2 [A7] as far as possible into the built-in peeler. 03 # % ? ! *. To delete text only : 2. Fold back the label to the right and quickly pull out the Display Label image label. The end of the backing is separated from the 04 + =. 1 label. + [Text Only] 05 ( ) [ ] < > . 06 . Tape cutter lever End of tape 07. Tape Pictographs are displayed on the LCD display with the exit slot corresponding alphabet and number of the Pictograph 08 . table. For the Pictograph table and Pictograph List, refer Remove the cassette cover by pressing the Insert four new AAA alkaline batteries Insert a tape cassette, making sure that it Insert the two hooks at the bottom of the to Symbols . 09 0 1 2 3 4 5 6. above indicated area. (LR03), making sure that their poles point in snaps into place. cassette cover into the slots on the machine Resetting the P-touch 10 7 8 9. 0 1 2 3. If a tape cassette is already installed, remove it by the correct directions.

9 Make sure that the end of the tape feeds under the (1), and then close the cover securely until 4 5 6 7 8 9. 11. pulling it straight up. Also, if batteries are already Always replace all four batteries at the same time tape guides. it snaps into place (2). Designing Labels You can reset the P-touch labeler when you want to installed, remove them. using brand new ones. Use only Brother M tapes with this machine. After you have installed the tape, feed the tape (see 12. initialize the settings, or in the event that the P-touch is not Make sure that the power is turned off when replacing batteries or tape cassettes. Feeding ) once and then push in the tape cutter lever to cut the tape. 1 Press , use to select a function under column [A], and then press . (The function working properly. 13. can also be selected with the shortcut keys listed under column [C]. ( + to )). 1 Press to turn off the power. Pictograph Changeable Faceplates The PT-90 comes with a variety of different faceplates - enabling users to customize the machine.

10 To change the faceplates, follow the steps below. 2 Use to select a setting listed under column [B], and then press . 2 While holding down turn on the power. and , press to A. 1 2 3 4 5 6 7. 1 2 3 4. Design [A] [B] Label image [C]. 3 Release , and then release and The internal memory is reset, and all text, settings and . B. C. Cassette cover Faceplates Large*1. stored files are cleared. D. Size Size +. 2 Small E. Front cover F. Hook Normal*1. DECO MODE. 1 G. This function allows you to create unique labels by using H. Slot Width Width 2 some built-in templates. You can choose from 8 types of +. templates. I. 1/2 Design Label Image Cooling J. 1 K. Remove the cassette cover by pressing the Remove the inserted faceplate, and then Insert the hooks on the front cover into the Insert the two hooks at the bottom of the Normal*1. above indicated area. Slide the front cover replace it with another one. slots on the machine, and slide back the cassette cover into the slots on the machine 2 L.


Related search queries