HMC584LP5 584LP5E - Analog Devices

1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at Support: Phone: 978-250-3343 or with Fo/2 OUTPUT - SMT88 - 1 HMC584LP5 / 584LP5 EMMIC VCO w/ HALF FREQUENCY OUTPUT& DIVIDE-BY-4, - DescriptionFeaturesFunctional DiagramThe HMC584LP5 & HMC584LP5E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC584LP5 & HMC584LP5E integrate resona-tors, negative resistance Devices , varactor diodes and feature half frequency and divide-by-4 outputs. The VCO s phase noise performance is excellent over temperature, shock, and process due to the oscillator s monolithic structure. Power output is +10 dBm typical from a +5V supply voltage. The prescaler and RF/2 functions can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching Output: Fo = - GHz Fo/2 = - GHzPout: +10 dBmPhase Noise: -110 dBc/Hz @100 kHz External Resonator Needed32 Lead 5x5mm SMT Package: 25mm Typical ApplicationsLow noise MMIC VCO w/Half Frequency, Divide-by-4 Outputs for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-UseElectrical Specifications, TA = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = + - - OutputRFOUTRFOUT/2 RFOUT/4+7+8-9+14+14-3dBmdBmdBmSSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT-110dBc/HzTune VoltageVtune212 VSupply CurrentIcc(Dig) + Icc(Amp) + Icc(RF)290330380mATune Port Leakage Current (Vtune= 12V)10 AOutput Return Loss2dBHarmonics/Subharmonics1/23/22nd3r d28342940dBcdBcdBcdBcPulling (into a.)

2 1 VSWR)3 MHz ppPushing @ Vtune= 5V20 MHz/VFrequency Drift CInformation furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks are the property of their respective price, delivery, and to place orders: Analog Devices , Inc., One Technology Way, Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at Application Support: Phone: 1-800- Analog -DFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at Support: Phone: 978-250-3343 or with Fo/2 OUTPUT - SMT88 - 2 Frequency vs.

3 Tuning Voltage, Vcc = +5 VSensitivity vs. Tuning Voltage, Vcc = +5 VSSB Phase Noise vs. Tuning VoltageFrequency vs. Tuning Voltage, T= 25 COutput Powervs. Tuning Voltage, Vcc = +5 VSSB Phase Noise @ Vtune = + +25C+85C -40 COUTPUT FREQUENCY (GHz)TUNING VOLTAGE (VOLTS) HMC584LP5 / 584LP5E010020030040050060070080001234567 8910111213+25C+85C -40 CSENSITIVITY (MHz/Volt)TUNING VOLTAGE (VOLTS) FREQUENCY (GHz)TUNING VOLTAGE (VOLTS)0246810121416012345678910111213+2 5C+85C -40 COUTPUT POWER (dBm)TUNING VOLTAGE (VOLTS)MMIC VCO w/ HALF FREQUENCY OUTPUT& DIVIDE-BY-4, - 10kHz OFFSET100kHz OFFSETSSB PHASE NOISE (dBc/Hz)TUNING VOLTAGE (VOLTS)-180-160-140-120-100-80-60-40-200 103104105106107+25C+85C -40 CSSB PHASE NOISE (dBc/Hz)OFFSET FREQUENCY (Hz)Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use.

4 Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks are the property of their respective price, delivery, and to place orders: Analog Devices , Inc., One Technology Way, Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at Application Support: Phone: 1-800- Analog -DFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at Support: Phone: 978-250-3343 or with Fo/2 OUTPUT - SMT88 - 3 Absolute Maximum RatingsVcc(Dig), Vcc(Amp), Vcc(RF)+ VdcVtune0 to +15 VJunction Temperature135 CContinuous Pdiss (T=85 C) (derate mW/C above 85 WThermal Resistance(junction to ground paddle)23 C/WStorage Temperature-65 to +150 COperating Temperature-40 to +85 CESD Sensitivity (HBM)Class 1 ATypical Supply Current vs.)

5 VccNote: VCO will operate over full voltage range shown (V)Icc (mA) SENSITIVE DEVICEOBSERVE HANDLING PRECAUTIONSRFOUT/2 Frequencyvs. Tuning Voltage, Vcc = +5 VRFOUT/2 Output Power vs. Tuning Voltage, Vcc = +5 VDivide-by-4 Frequencyvs. Tuning Voltage, Vcc = +5 VDivide-by-4 Output Powervs. Tuning Voltage, Vcc = +5V-10-8-6-4-20012345678910111213+25C+85 C -40 COUTPUT POWER (dBm)TUNING VOLTAGE (VOLTS) +25C+85C -40 COUTPUT FREQUENCY (GHz)TUNING VOLTAGE (VOLTS)0246810121416012345678910111213+2 5C+85C -40 COUTPUT POWER (dBm)TUNING VOLTAGE (VOLTS) +25C+85C -40 COUTPUT FREQUENCY (GHz)TUNING VOLTAGE (VOLTS) / 584LP5 EMMIC VCO w/ HALF FREQUENCY OUTPUT& DIVIDE-BY-4, - GHzInformation furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use.

6 Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks are the property of their respective price, delivery, and to place orders: Analog Devices , Inc., One Technology Way, Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at Application Support: Phone: 1-800- Analog -DFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at Support: Phone: 978-250-3343 or with Fo/2 OUTPUT - SMT88 - 4 Outline DrawingNOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY2. DIMENSIONS ARE IN INCHES [MILLIMETERS]3. LEAD SPACING TOLERANCE IS PAD BURR LENGTH SHALL BE MAXIMUM. PAD BURR HEIGHT SHALL BE PACKAGE WARP SHALL NOT EXCEED ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND NumberPackage Body MaterialLead FinishMSL RatingPackage Marking [3] HMC584LP5 Low Stress Injection Molded PlasticSn/Pb SolderMSL3 [1]H584 XXXXHMC584LP5 ERoHS-compliant Low Stress Injection Molded Plastic100% matte SnMSL3 [2]H584 XXXX[1] Max peak reflow temperature of 235 C[2] Max peak reflow temperature of 260 C[3] 4-Digit lot number XXXXP ackage / 584LP5 EMMIC VCO w/ HALF FREQUENCY OUTPUT& DIVIDE-BY-4, - GHzPin DescriptionsPin NumberFunctionDescriptionInterface Schematic1 - 3, 8 - 10, 13 - 18, 20, 22 - 28, 30 - 32N/CNo Connection.

7 These pins may be connected to RF/DC ground. Performance will not be block (Dig)Supply voltage for prescaler. If prescaler is not required, this pin may be left open to conserve approximately 65 mA of furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks are the property of their respective price, delivery, and to place orders: Analog Devices , Inc., One Technology Way, Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at Application Support: Phone: 1-800- Analog -DFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at Support: Phone: 978-250-3343 or with Fo/2 OUTPUT - SMT88 - / 584LP5 EMMIC VCO w/ HALF FREQUENCY OUTPUT& DIVIDE-BY-4, - GHzPin DescriptionsPin NumberFunctionDescriptionInterface Schematic7 Vcc (Amp)Supply voltage, for RFOUT/2 output.

8 If RFOUT/2 is not required, this pin may be left open to conserve approximately 30 mA of frequency output (AC coupled).19RF OUTRF output (AC coupled).21 Vcc (RF)Supply Voltage, +5V29 VTUNEC ontrol voltage and modulation input. Modulation bandwidth dependent on drive source impedance. See Determining the FM Bandwidth of a Wideband Varac-tor Tuned VCO application , 11, PaddleGNDP ackage bottom has an exposed metal paddle thatmust be connected to RF/DC Application CircuitInformation furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks are the property of their respective price, delivery, and to place orders: Analog Devices , Inc.

9 , One Technology Way, Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at Application Support: Phone: 1-800- Analog -DFor price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at Support: Phone: 978-250-3343 or with Fo/2 OUTPUT - SMT88 - 6 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground paddle should be con-nected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon PCBList of Materials for Evaluation PCB 110227 [1]ItemDescriptionJ1 - J4 PCB Mount SMA RF ConnectorJ5 - J62 mm DC HeaderC1 - C3100 pF Capacitor, 0402 ,000 pF Capacitor, 0402 - F Tantalum CapacitorU1 HMC584LP5 / HMC584LP5E VCOPCB [2]110225 Eval Board[1] Reference this number when ordering complete evaluation PCB[2] Circuit Board Material: Rogers / 584LP5 EMMIC VCO w/ HALF FREQUENCY OUTPUT& DIVIDE-BY-4, - GHzInformation furnished by Analog Devices is believed to be accurate and reliable.

10 However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks are the property of their respective price, delivery, and to place orders: Analog Devices , Inc., One Technology Way, Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at Application Support: Phone: 1-800- Analog -D