ET200M Operating Instructions - Siemens

1 ET 200M. Preface Product overview 1. Brief Instructions on 2. SIMATIC commissioning Assignment planning 3. Distributed I/O device ET 200M 4. Installation Connecting 5. Operating Instructions Commissioning 6. Maintenance and service 7. Functions 8. Interrupt, error and system messages 9. Technical Specifications 10. Compatibilities between the IM 153-x A. Order Numbers for the ET. 200M B. 04/2022. EWA-4 NEB7806006-09. Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol.

2 These notices shown below are graded according to the degree of danger. DANGER. indicates that death or severe personal injury will result if proper precautions are not taken. WARNING. indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION. indicates that minor personal injury can result if proper precautions are not taken. NOTICE. indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified Personnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety Instructions .

3 Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. Proper use of Siemens products Note the following: WARNING. Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens . Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed.

4 Trademarks All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Copyright Siemens AG 2008 - 2022. Digital Industries 05/2022 Subject to change All rights reserved Postfach 48 48. 90026 N RNBERG. GERMANY. Preface Purpose of the Operating Instructions The information in these Operating Instructions enables you to operate an IM 153 Interface Module together with the modules of the S7-300 spectrum in the ET 200M distributed I/O.

5 System as DP slave. Basic knowledge required A basic knowledge of automation technology is required to understand the Operating Instructions . Scope of the Operating Instructions Module Order number As of product version IM 153-1 6ES7153-1AA03-0XB0 02. IM 153-2 6ES7153-2BA10-0XB0 01. 6ES7153-2BA70-0XB0 01. IM 153-4 PN 6ES7153-4AA00-0XB0 01. 6ES7153-4AA01-0XB0 01. Agreement: In the following, the designation IM 153-x is used in the Operating Instructions , except if a description refers directly to a special version of the IM 153-x. A variant of the IM 153-1 as well as the IM 153-2 is additionally available as a module for use in extended environmental conditions ("Outdoor"). You can find the climatic and mechanical ambient conditions under which you can use this IM 153-1 / -2 in the reference manual "S7- 300 automation system, module specifications ( )".

6 For the new revision of the IM 153-x, we reserve the right to enclose a product information with current information for the corresponding IM 153-x Interface Module or the Operating Instructions . You can also find this product information on the Internet ( =en). Look for "IM 153-2" there, for example. ET 200M. Operating Instructions , 04/2022, EWA-4 NEB7806006-09 3. Preface Changes compared to the previous version Compared to the previous version of these "Distributed I/O device ET 200M" Operating Instructions with drawing number EWA-4 NEB780600601-07, edition 02/2006, the following changes have been made: The IM 153-4AA01 Interface Module offers the following new functions: Isochronous real-time communication Class 2. Prioritized startup Operation without removable data storage medium (SIMATIC Micro Memory Card).

7 Device replacement without removable data storage medium / programming device Changing IO devices during operation (changing partner ports). In addition, the product information from 01/2007 to 08/2007 accompanying the Operating Instructions has been integrated into the Operating Instructions . Approvals See section "Standards and approvals". CE approval See section "Standards and approvals". Marking for Australia (C-Tick mark). See section "Standards and approvals". Standards See section "Standards and approvals". ET 200M. 4 Operating Instructions , 04/2022, EWA-4 NEB7806006-09. Preface Position in the information landscape The following table shows an overview of the contents of the manuals for ET 200M. Manual Contents "ET 200M distributed I/O device Configuring the mechanical and electrical configu- ( ration W/view/en/1142798) ".

8 Installation and wiring Commissioning and diagnostics Interface Module IM 153. Order numbers for ET 200M. "S7-300 automation system, module specifi- General technical data cations ( Power supply modules W/view/en/8859629) " Digital modules Analog modules Order numbers for S7-300. "ET 200M signal modules for process auto- Overview of use in process automation mation ( Parameter assignment with SIMATIC PDM. W/view/en/7215812) " Digital input module Digital output module In addition to these Operating instruction, you need the manual for the using the DP Master and the manual "Distributed I/O System ET 200". Manual Contents Distributed I/O system ET 200 System overview of ET 200 and PROFIBUS. Planning and commissioning Description of RS 485 repeater Description of S5-95U.

9 Manual for DP Master Configuration and commissioning of a DP master system Description of the DP Master In the appendix "Order Numbers for the ET 200M (Page 247)", you will find a list of additional sources of information for SIMATIC S7 and the Distributed I/O System ET 200. The description of the parameter assignment and configuration telegram is not part of these Operating Instructions . You can find the description on the Internet ( ). ET 200M. Operating Instructions , 04/2022, EWA-4 NEB7806006-09 5. Preface Guide The Operating Instructions contain the following aids that provide quick access to the specific information you need: At the beginning of the Operating Instructions , you will find a complete table of contents and a list of the tables contained in the entire Operating Instructions .

10 In the chapters, you will find information in the left column of each page that provides an overview of the contents of the section. Following the appendices, you will find a glossary defining important technical terms used in the Operating Instructions . At the end of the Operating Instructions , you will find a detailed index, which enables you to quickly access the information you require. Recycling and disposal ET 200M is recyclable due to its low-pollution components. For ecologically compatible recycling and disposal of your old device, contact a certified waste disposal service for electronic scrap. Contact See product information "Technical Support, Contacts and Training ( )". Training See product information "Technical Support, Contacts and Training ( )".