HMC1097LP4E - Analog Devices

1 HMC1097LP4E . WIDEBAND DIRECT QUADRATURE. MODULATOR, 100 - 6000 MHz Typical Applications Features The HMC1097LP4E is Ideal for: Very Low Noise Floor, -160 dBm/Hz UMTS, GSM or CDMA Basestations Excellent Carrier & Sideband Suppression Fixed Wireless or WLL Very High Linearity, +30 dBm OIP3. ISM Transceivers, 900 & 2400 MHz High Output Power, +11 dBm Output P1dB. GMSK, QPSK, QAM, SSB Modulators High Modulation Accuracy 11 Cellular/3G and WiMAX/4G 24 Lead 4x4 mm QFN Package: 16 mm2. MODS & DEMODULATORS - SMT. Functional Diagram General Description The HMC1097LP4E is a low noise, high linearity Direct Quadrature Modulator RFIC which is ideal for digital modulation applications from to GHz including;. Cellular/3G, WiMAX/4G, Broadband Wireless Access & ISM circuits. Housed in a compact 4x4 mm (LP4). SMT QFN package, the RFIC requires minimal external components & provides a low cost alternative to more complicated double upconversion architectures.

2 The RF output port is single-ended and matched to 50. Ohms with no external components. The LO requires -6 to +6 dBm and can be driven in either differential or single-ended mode. This device is optimized for a +5V. supply, and offers improved carrier feedthrough and sideband suppression characteristics. Electrical Specifications, See Test Conditions on following page herein. Parameter Typ. Typ. Typ. Typ. Typ. Units Frequency Range, RF 450-960 1700-2200 2200-2700 3400-4000 5000-6000 MHz Output Power 0 dBm Conversion Voltage Gain dB. Output P1dB +11 +11 + +10 + dBm Output Noise Floor -162 -160 -159 -159 -156 dBm/Hz Output IP3 +29 +31 +29 +22 +17 dBm Carrier Feedthrough -40 -39 -36 -29 -33 dBm (uncalibrated). Sideband Suppression 40 46 48 32 29 dBc (uncalibrated). LO Port Return Loss 4 6 6 6 6 dB. RF Port Return Loss 12 14 15 16 16 dB.

3 For price, Information delivery furnished by Analogand Devicesto isplace believedorders: Hittite to be accurate and Microwave reliable. However,Corporation, no For price, 2delivery, Elizabeth Drive, and to placeChelmsford, orders: Analog MA 01824. Devices , Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, Box 9106, Norwood, MA 02062-9106. Phone: rights of third parties that may result 978-250-3343. from its use. Fax: Specifications subject 978-250-3373. to change without notice. NoOrder On-line at 1 license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks areApplication the property of theirSupport: Phone: 978-250-3343. respective owners. Phone: 781-329-4700 Order online at or Application Support: Phone: 1-800- Analog -D.

4 HMC1097LP4E . WIDEBAND DIRECT QUADRATURE. MODULATOR, 100 - 6000 MHz Electrical Specifications, (continued). Parameter Conditions Min. Typ. Max. Units RF Output RF Frequency Range 100 6000 MHz RF Return Loss 15 dB. LO Input LO Frequency Range 100 6000 MHz LO Input Power -6 0 +6 dBm LO Port Return Loss 6 dB. Baseband Input Port Baseband Input DC Voltage (Vbbdc) + (+ + ) V. MODS & DEMODULATORS - SMT. Baseband Input DC Bias Current (Ibbdc) Single-ended. 110 pA. Single-ended Baseband Input Capacitance De-embed to the lead of the device. pF. DC Power Supply Supply Voltage (Vcc1, Vcc2) + + + V. Supply Current (Icc1 + Icc2) EN Low 170 mA. Supply Current (Icc1 + Icc2) EN High 8 mA. Enable/Disable Interface EN High Level Device disabled 5 V. EN Low Level Device enabled 0 V. Enable/Disable Settling Time 400/400 ns LO Leakage Isolation EN=5V, LO= , 0dBm dBm Test Conditions: Unless Otherwise Specified, the Following Test Conditions Were Used Parameter Condition Temperature +25 C.

5 Baseband Input Frequency 200 kHz Baseband Input DC Voltage (Vbbdc) + Baseband Input AC Voltage (Peak to Peak Differential, I and Q) Baseband Input AC Voltage for OIP3 Measurements (Peak to Peak Differential, I and Q) 650 mV per tone @ & MHz Baseband Input AC Voltage for Noise Floor Measurements (Peak to Peak Differential, I and Q) no baseband input voltage Frequency Offset for Output Noise Measurements 20 MHz Supply (Vcc1, Vcc2) + LO Input Power 0 dBm LO Input Mode Single-Ended through LON. Refer to HMC1097LP4E Application Schematic Mounting Configuration Herein Sideband & Carrier Feedthrough Uncalibrated Calibrated vs. Uncalibrated Test Results During the Uncalibrated Sideband and Carrier Suppression tests, care is taken to ensure that the I/Q signal paths from the Vector Signal Generator (VSG) to the Device Under Test (DUT) are equal.

6 The Uncalibrated Sideband and Carrier Suppression plots were measured at T= -40 C, +25 C, and +85 C. The Calibrated Sideband Suppression data was plotted after a manual adjustment of the I/Q amplitude balance and I/Q phase offset (skew) at +25 C, 5V Vcc, 0 dBm LO input power level. The +25 C adjustment settings were held constant during tests over temperature. The Calibrated Carrier Suppression data was plotted after a manual adjustment of the IP/IN & QP/QN DC offsets at +25 C, 5V Vcc, 0 dBm LO input power level. The +25 C adjustment settings were held constant during tests over temperature. For price, Information delivery furnished by Analogand Devicesto isplace believedorders: Hittite to be accurate and Microwave reliable. However,Corporation, no For price, 2delivery, Elizabeth Drive, and to placeChelmsford, orders: Analog MA 01824.

7 Devices , Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, Box 9106, Norwood, MA 02062-9106. Phone: rights of third parties that may result 978-250-3343. from its use. Fax: Specifications subject 978-250-3373. to change without notice. NoOrder On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks areApplication the property of theirSupport: Phone: 978-250-3343. respective owners. Phone: 781-329-4700 Order online at or Application Support: Phone: 1-800- Analog -D. 2. HMC1097LP4E . WIDEBAND DIRECT QUADRATURE. MODULATOR, 100 - 6000 MHz Output Power vs. Frequency Output IP3, P1dB & Noise Floor @ 20 MHz Over Temperature Offset vs. Frequency Over Temperature 5. 40 -110. OUTPUT P1dB (dBm) & OUTPUT IP3 (dBm).

8 OUTPUT NOISE FLOOR @20 MHz (dBm/Hz). +25C. 30 +85C -120. OUTPUT POWER (dBm). -40C. 0. 20 -130. OUTPUT IP3. 10 -140. -5. 11. 0 OUTPUT P1dB -150. NOISE FLOOR. -10 -10 -160. +25C. +85C -20 -170. -40C. SET-UP NOISE FLOOR. MODS & DEMODULATORS - SMT. -15 -30 -180. 0 1000 2000 3000 4000 5000 6000 0 1000 2000 3000 4000 5000 6000. FREQUENCY (MHz) FREQUENCY (MHz). Uncalibrated Carrier Feedthrough [1] Calibrated Carrier Feedthrough [1]. vs. Frequency Over Temperature vs. Frequency Over Temperature 0 0. +25C. CARRIER FEEDTHROUGH (dBm). -10. CARRIER FEEDTHROUGH (dBm). -10 +85C. -20 -40C. -20. -30. -30 -40. -40 -50. -60. -50. +25C. -70. -60 +85C. -40C -80. -70 -90. 0 1000 2000 3000 4000 5000 6000 0 1000 2000 3000 4000 5000 6000. FREQUENCY (MHz) FREQUENCY (MHz). Uncalibrated Carrier Feedthrough [1]. vs. Frequency Over Temperature When Disabled RF and LO Return Loss vs.

9 Frequency -20 0. CARRIER FEEDTHROUGH (dBm). -30. -5. -40. RETURN LOSS (dB). -50 -10. -60. -15. -70. -80. +25C -20. -90 +85C LO. RF. -40C. -100 -25. 0 1000 2000 3000 4000 5000 6000 0 1 2 3 4 5 6. FREQUENCY (MHz) FREQUENCY (MHz). [1] See note titled Calibrated vs. Uncalibrated test results herein. For price, Information delivery furnished by Analogand Devicesto isplace believedorders: Hittite to be accurate and Microwave reliable. However,Corporation, no For price, 2delivery, Elizabeth Drive, and to placeChelmsford, orders: Analog MA 01824. Devices , Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, Box 9106, Norwood, MA 02062-9106. Phone: rights of third parties that may result 978-250-3343. from its use. Fax: Specifications subject 978-250-3373. to change without notice.

10 NoOrder On-line at 3 license is granted by implication or otherwise under any patent or patent rights of Analog Devices . Trademarks and registered trademarks areApplication the property of theirSupport: Phone: 978-250-3343. respective owners. Phone: 781-329-4700 Order online at or Application Support: Phone: 1-800- Analog -D. HMC1097LP4E . WIDEBAND DIRECT QUADRATURE. MODULATOR, 100 - 6000 MHz Output Power vs. Frequency Output IP3, P1dB & Noise Floor @ 20 MHz Over LO Power Offset vs. Frequency Over LO Power 5 -15 40 -110. OUTPUT P1dB (dBm) & OUTPUT IP3 (dBm). OUTPUT NOISE FLOOR @20 MHz (dBm/Hz). OUTPUT POWER. -6dBm -120. SIDEBAND SUPPRESSION (dBc). 30 0dBm +6dBm OUTPUT POWER (dBm). 0 -30. 20 OUTPUT IP3. -130. 10 -140. -5 -45. 0 OUTPUT P1dB NOISE FLOOR -150. SIDEBAND SUPPRESSION -10 -160. -10 -60. -6dBm 0dBm -20 -170. +6dBm SET-UP NOISE FLOOR.