Temposonics - MTS Sensors

1 Suitable for hard real-time requirements Multi-position measurement LEDs for sensor diagnosticsThe Measurable DifferenceDATA SHEETR-Series POWERLINKT emposonics Magnetostrictive Linear Position SensorsData SheetR-Series Powerlink2 MEASURING TECHNOLOGYFor position measurement, the absolute, linear Temposonics position Sensors make use of the properties offered by the specially designed magnetostrictive waveguide. Inside the sensor a torsional strain pulse is induced in the waveguide by momentary interaction of two magnetic fields. The interaction between these two magnetic fields produces a strain pulse, which is detected by the electronics at the head of the sen-sor. One field is produced by a moving position magnet, which travels along the sensor rod with the waveguide inside.

2 The other field is gen-erated by a current pulse applied to the waveguide. The position of the moving magnet is determined precisely by measuring the time elapsed between the application of the current pulse and the arrival of the strain pulse at the sensor head. The result is a reliable position measurement with high accuracy and POWERLINK V2 InterfaceTemposonics position Sensors fulfil the requirements of the Ethernet POWERLINK Standardization Group (ESPG). Ethernet POWERLINK V2 is an open protocol based on the Ethernet-standard according to IEEE It is an extension to the Ethernet protocol which allows real-time data communication. Within the Ethernet POWERLINK protocol a CANopen based communication protocol for user data is specified.

3 POWERLINK is the only Ethernet protocol that meets hard real-time requirements with a software-only concept. No special POWERLINK hardware is needed. Sensor interface :- Absolute position information- VelocityMagnet fieldof current pulseMagnet field of position magnetMechanicalstrain pulseMovable position magnetMagnetostrictivesensing element(waveguide)Strain (torsion) pulse converterCurrentinterrogationpulseData SheetR-Series Powerlink31/ with magnet # 252 The IP rating is not part of the UL approvalInputMeasured valuePosition, velocity / Option: Multi-magnet measurement (max. 4 positions simultaneous)Stroke lengthProfile: mm / Rod: mmOutputInterfaceEthernet POWERLINK Standardization Group (ESPG)Data protocolPOWERLINK V2 according to IEEE - Displacementup to 1 mUpdate ms up 2400 mm / ms up 4800 mm / ms up 7600 mm stroke lengthLinearity 1< % (Minimum 40 m)Repeatability< % (Minimum m)Temperature coefficient< 15 ppm/ CHysteresis< 4 mOperating conditionsMagnet movement velocityanyOperating +70 CDew point, humidity90 % rel.

4 Humidity, no condensationIngress protection 2 Profile: IP65 / Rod: IP67 Shock test100 g (single shock), IEC-Standard 6008-2-27 Vibration test15 g / Hz, IEC-Standard 6008-2-6 (resonance frequencies excluded)EMC testElectromagnetic emission EN 61000-6-4 (for use in industrial environment) Electromagnetic susceptibility EN 61000-6-2 The sensor meets the requirements of the EC directives and is marked with CEDesign/MaterialDiagnostic displayLEDs beside connectorProfile model:Sensor electronics housingaluminumSensor profilealuminumRod model:Sensor electronics housingaluminumRod with flangestainless steel / AISI 304 InstallationMounting positionanyProfilemoveable mounting clamps or T-slot nuts M5 in base channelRodthreaded flange M18 or "-16 UNF-3A, Hex nut M18 Electrical connectionConnection type4 pin connector M12-DF, 4 pin connector M8 Operating voltage 324 VDC ( 15 / +20 %)Polarity protectionup to 30 VDCO vervoltage protectionup to 36 VDCC urrent drain110 mA typical Ripple (power supply)< VppDielectric strength500 VDC (DC ground to machine ground)TECHNICAL DATA3/ UL Recognition requires an approved power supply with energy limitation UL 61010-1), or Class 2 rating according to the National Electrical Code (USA)

5 / Canadian Electrical SheetR-Series Powerlink4 PROFILE DESIGNT emposonics RP offers modular construction, flexible mounting configurations and easy installation. Position measurement is non-contact via two versions of permanent magnets. A sliding magnet running in profile housing rails. Connection with the moving machine part is via a ball jointed arm to taking up axial forces. A floating magnet, mounted directly on the moving machine part, travels over the profile at a low distance. Its air-gap allows the correction of small misalignments at dimensions in mmHIGH PRESSURE ROD DESIGNT emposonics RH with a pressure resistant stainless steel flange and sensing rod. They are suitable in all hydraulic cylinders suitable for use in hydraulic cylinders and externally in all applications where space is a problem.

6 Position measurement is via ring or U-magnets travelling along the sensing rod without any mechanical contact. In/OutPinCableFunction1234female1 YETx+2 WHRx+3 OGTx-4 BURx-Input voltagePinCableFunction1234male1BN+24 VDC ( 15/+20 %) Ground (0 V) WIRING (Connector view sensor)BUS InInput voltageBUS range range *measuring length 10465125*> 5000 mmstroke range range *measuring length 10465125*> 5000 mmstroke lengthData SheetR-Series Powerlink5 All dimensions in mmPosition magnets for profile model (please order separately) 495714 140 slider SPart no. 252 182 Magnet slider VPart no. 252 184U-magnet OD33 Part no. 251 416-2 Material: GFK, magnet hard ferriteWeight: ca.

7 35 gOperating temperature: +75 CMaterial: GFK, magnet hard ferriteWeight: ca. 35 gOperating temperature: +75 CMaterial: PA ferriteWeight: ca. 10 gOperating temperature: +100 CSurface pressure: max. 40 N/mm2 Fastening torque for M4 screws: max. 1 NmPosition magnets for rod model (please order separately) 140 magnet OD33 Part no. 201 542-2 Ring magnet OD25,4 Part no. 400 533U-magnet OD33 Part no. 251 416-2 Material: PA ferrite GF20 Weight: ca. 14 gOperating temperature: +100 CSurface pressure: max. 40 N/mm2 Fastening torque for M4 screws: max. 1 NmMaterial: PA ferriteWeight: ca. 10 gOperating temperature: +100 CSurface pressure: max. 40 N/mm2 Material: PA ferriteWeight: ca.

8 10 gOperating temperature: +100 CSurface pressure: max. 40 N/mm2 Fastening torque for M4 screws: max. 1 NmConnection types~ 52 1 Widthacross flats 13 Width across flats 17 Power cable, female 4 pin (M8) and cable with pigtail terminationPart no.: 5 m: 530 066 10 m: 530 096 15 m: 530 093 Industrial Ethernet cable (Cat 5e Es) d-codedPart no.: 530 064 Male, straight, 4 pinPart no.: 370 523 Wire gage: 4 mm2 shieldedCable jacket: PUR; gray Max. cable : 8 mmConnector type: two male, 4 pin (M12)Cable jacket: PUR cable jacket; greenOperating temperature: +70 CCable length: 5 mHousing: zinc nickel platedTermination: isolation displacementWire: AWG24- AWG22 Cable : mmACCESSORIESData SheetR-Series Powerlink6 ORDER CODEbForm factorProfile Temposonics RPSM agnet slider, joint to topVMagnet slider, joint at frontMU-magnet, OD33 Rod Temposonics RHMF lange M18 (Standard)VFlange M18 mit Fluorelastomer housing-sealDFlange M18 bushing on rod endRFlange M18 thread M4 at rod endJFlange M22 , rod mm, 800 barSFlange " - 16 UNF - 3 AaSensor modelRPProfileRHRodgMagnet number for multi-position measurement 3022 lengthXXXXP rofile: mm / Rod.

9 MmfOutputU301 POWERLINK V2dConnection typeD562 4 pin female receptacle M12 D-coded, 4 pin male, M8e Operating voltage1+24 VDC (+20 % / 15 %)Stroke lengthOrdering mm 25 mm 50 mm100 mmSTROKE LENGTH RPStroke lengthOrdering mm 5 mm 10 mm 25 mm 50 mm100 mm250 mmSTROKE LENGTH RHMD561U301 Zabcdefg3/ Note: Please specify magnet numbers for your sensing application and order separatelyOptional:optionalDocument Part Number: 551429 Revision A (EN) 05/2014 LOCATIONSLEGAL NOTICESUSAMTS Systems CorporationSensors Division3001 Sheldon DriveCary, 27513, USATel. +1 919 677-0100 Fax +1 919 GERMANYMTS Sensor TechnologieGmbH & Co. KGAuf dem Sch ffel 958513 L denscheid, GermanyTel.

10 + 49 2351 9587-0 Fax + 49 2351 Sensors Technology Aihara-machi, Machida-shi, Tokyo 194-0211, JapanTel. + 81 42 775-3838 Fax + 81 42 775- Systems SASZone EUROPARC B timent EXA 1616/18, rue Eug ne Dupuis94046 Creteil, FranceTel. + 33 1 58 4390-28 Fax + 33 1 58 Systems DivisionVia Diaz,425050 Provaglio d Iseo (BS), ItalyTel. + 39 030 988 3819 Fax + 39 030 982 Sensors Room 504, Huajing Commercial Center, No. 188, North Qinzhou Road200233 Shanghai, ChinaTel. +86 21 6485 5800 Fax +86 21 6495 Temposonics and Level Plus are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. Printed in USA. Copyright 2014 MTS Systems Corporation.