Test Equipment - NTE Electronics, Inc

1 Test Equipment COMPLETE LINE. Analog Multimeter AM-10. Pocket Size - Very Economical 6 Functions, 10 Ranges 4% Basic DC Accuracy Resistance 2 Mirrored Scale Decibels 2K /V AC & DC Input Sensitivity Battery Test Fuse and Diode Protection 90-Day Limited Warranty DC Current Test Leads (ML-10) and Operating Instructions Included SPECIFICATIONS: General Front/Side Controls: Range selector switch, Operating Position: Horizontal or vertical 0 adjustment Power: AA battery (not included). Movement: 90 arc, 200 A full scale Movement and Indicator Protection: Scales (5): One scale for OHMS, 2 scales for Diode and Fuse ( , 250V). AC/DC, one scale for dB and Battery test Dimensions, Weight: wide x long x Scale Length: 2 thick (60mm x 89mm x 29mm), net weight 4oz.

2 (113g). DC Voltage AC Voltage Decibels Ranges: 0-15, 150, 500V Ranges: 0-15, 150, 500V Ranges: Input Impedance: 2k per Volt Input Impedance: 2k per Volt -20dB to +26dB on 15V AC range Rated Accuracy: 4% of full scale Rated Accuracy: 5% of full scale 0dB to +46dB on 150V AC range 10dB to +56dB on 500V AC range DC Current Resistance Battery Test Ranges: 0-150mA Ranges: Ranges: AA. Rated Accuracy: 4% of full scale R x 1K 0 - 1M (full scale). 2 800-631-1250 Analog Multimeter AM-30. Our Top Of The Line Analog Meter Full Function Temperature Measurement 3% DC Accuracy FS 1000 Volts AC/DC. 5 Mirrored Scale Transistor Test 30K /V DC, 10K /V AC Battery Test Input Sensitivity Continuity Buzzer Fuse and Diode Protection Tilt Stand/Carrying Handle 10 Amp DC Range 90-Day Limited Warranty Test Leads (ML-43), Temperature Probe (TC-30), Fuse and Operating Instructions Included SPECIFICATIONS: General Front Panel Controls: Range selector Power: 9V (NEDA 1604) and switch with OFF position, 0 adjust/ AA (2) batteries (not included).

3 Temperature calibration, 0 calibration switch Movement and Indicator Protection: Movement: 90 arc, 25 A movement Fuse ( , 250V). Scales (8): One scale for OHMS, three scales Operating Temperature: 18 C to 25 C. for AC/DC, one scale for dB, two scales for for rated accuracy temperature, one scale for battery test Dimensions, Weight: wide x long x Scale Length: 5 thick (127mm x 175mm x 48mm), Operating Position: Horizontal or vertical; net weight 14oz. (422g). rubber pads to prevent slipping on moderate horizontal slopes DC Voltage AC Voltage Decibels Ranges: , 3, 12, 60, 300, 1000V Ranges: 0-12, 30, 120, 300, 1000V Ranges: Input Impedance: 30k per Volt Input Impedance: 10k per Volt -10dB to +24dB on 12V AC range Rated Accuracy: 3% of full scale Rated Accuracy: 4% of full scale -2dB to +32dB.

4 8dB to +44dB. 20dB to +52dB. DC Current Resistance 30dB to +62dB. Ranges: 120 , 13m, 30m, 300m, 10A Ranges: 0dB referenced to 1 milliwatt at 600 . Rated Accuracy: 3% of full scale R x 1 0-5k . R x 100 0-500k . R x 1k 0-5M Temperature R x 10k 0-50M Ranges: -50 C to +260 C (-60 F to +400 F). Rated Accuracy: 3 arc Battery Test Ranges: AA, 9V. 800-631-1250 3. Analog Multimeter FET-43. Very High Input Impedance Excellent Trouble Shooting Tool 5 Functions, 43 Ranges Meter Scale Polarity Reversing Switch *. DC accuracy FS Zero Center Scale 10M DC, 1M AC Adjustment Input Resistance Low Battery Indicator FET Input Metal Tilt Stand Jeweled Meter Movement 1-Year Limited Warranty Overload Protection.

5 Battery, Test Leads (ML-43) and Operating Instructions Included SPECIFICATIONS: General Front Panel Controls: Range selector switch, Operating Position: Horizontal or power on-off switch, with operational LED, vertical, rubber pads to prevent polarity reverse switch, 0 ADJ, slipping on moderate slopes Center 0 ADJ Power: AA (2) and Movement: Jeweled pivots, 90 arc, 9V (NEDA 1604) batteries 44 A full scale Movement and Indicator Protection: Double Scales (9): DC V A, AC RMS, AC peak to FET protection and fuse (2A/250V). peak (2), DC V A (center null), AC 12 A, Operating Temperature: 25 C (75 F) rated DC A, dB accuracy, less than 4% additional error over the Scale Length: range of -4 C (25 F) to 50 C (130 F).

6 *Polarity Reverse Switch: DC and ranges Dimensions, Weight: 5 wide x long x (Reverses meter movement only. Does not 2 thick (125mm x 170mm x50mm), reverse test lead polarity.) net weight 17oz. (480g). DC Voltage AC Voltage AC Current Ranges: , , , 120, 300, 1200V, Ranges: RMS 0-3, 12, 30, 120, 300, 1200V, Ranges: 0-12A, within full scale. DC, 0- , , 6, 15, 60, 150, 600V at Center 0 peak to peak, , 33, 84, 330, 840, AC,12 Amp range on separate jack Input Impedance: Approx. 10M , 3M on 3300 RMS, 1200V (peak to peak 3300V) on 300 mV range separate jack Resistance Rated Accuracy: DC and AC of Input Impedance: Approx. 1M , 800pF;. Ranges: full scale on all ranges on 3V range Rx1 0 - 1K (Center 10).

7 Rated Accuracy: R x 10 0 - 10K (Center 100 ). 50Hz - 5 MHz 3%. DC Current 30Hz - 10 MHz 1dB sine wave R x 100 0 - 100K (Center 1K ). Ranges: A, , 3, 30, 300mA, 12A R x 1K 0 - 1M (Center 10K ). 30Hz - 1 MHz 1dB rectangular wave at R x 10K 0 - 10M (Center 100K ). Potential Drop: 300mV 3V range only R x 1M 0 - 1000M (Center 10M ). Rated Accuracy: Within full scale on 30Hz - 3 MHz 5% sine wave Accuracy: of arc all ranges 30Hz - 120 MHz 5% rectangular on all other ranges except 3V. Does not apply to 12 Amp range. Damage to dB: -10dB - +63dB on AC ranges meter or injury to operator can occur if voltage or excessive current is applied to 12 Amp.

8 Input. 4 800-631-1250 Digital Multimeter DM-21. Low Cost General Purpose Transistor hFE Low Power . Diode Test Overload Protection LED Test RF Shielded Square Wave Generator Polarity Indicator 7 Functions, 11 Ranges Low Battery Indicator Basic DC Accuracy Tilt Stand 3 1/2 Digit LCD, H 1-Year Limited Warranty Battery, Test Leads (ML-375) and Operating Instructions Included SPECIFICATIONS: General Display: 3 1/2 Digit LCD, high, Power: 9V carbon zinc battery (NEDA 1604). with polarity Battery Life: 150 hours typical Overrange Indication: 1 or 1 is displayed. with carbon zinc cells Measurement Rate: times per second Low Battery Indicator: Symbol is displayed Operating Environment: 0 C to 50 C, <70% Dimensions, Weight: wide x 6 long x.

9 Relative humidity thick (70mm x 151mm x 38mm), Storage Environment: -20 C to 60 C, <80% net weight 7oz. (200g). relative humidity with battery removed DC Voltage Resistance LED Test Range Resolution Accuracy Range Resolution Accuracy Voltage: < @ 10mA 2V 1mV of rdg 1D 200 of rdg 3D. 20V 10mV of rdg 1D 2K 1 of rdg 3D. 200V 100mV of rdg 1D 20K 10 of rdg 3D. Generator 600V 1V of rdg 1D 200K 100 of rdg 3D Waveform: Square Input Impedance: 1M on all ranges. 2M 1K of rdg 3D Frequency: 50Hz approx Maximum Input: 600V DC or 500AC rms. Overload Protection: 500V DC or 350AC rms Output: 3 to DC, 50% Duty Cycle Impedance: 120K . AC Voltage Transistor hFE Test (PNP, NPN).

10 Range Resolution Accuracy Test Condition: 10 A Base Current @ < 200V 100mV of rdg 4D hFE Range: 0 - 1000. 500V 1V of rdg 4D. Input Impedance: 450K on all ranges. Diode Test Maximum Input: 600V DC or 500AC rms. Voltage: < @ 1mA Frequency Range: 50Hz - 500Hz. 800-631-1250 5. Digital Multimeter DM-38A. Multifunction DMM Heavy Duty 3 3/4 Digit, H Peak Data Hold Frequency Counter Overload Protection Capacitance Test RF Shielded Logic Detector Lo Power Ohms 20A AC/DC Tilt Stand Basic DC Accuracy Polarity Indicator 40M Full Scale Overrange Indicator Transistor hFE Test Low Battery Indicator Diode Test 1-Year Limited Warranty Audible Continuity Test 20M Input Z.