PESD1LIN LIN-bus ESD protection diode - Nexperia

1 1. Product General descriptionPESD1 LIN in a very small SOD323 (SC-76) Surface-Mounted Device (SMD) plastic package designed to protect one automotive Local Interconnect Network (LIN) bus line from the damage caused by ElectroStatic Discharge (ESD) and other Features and benefits ESD protection of one automotive LIN-bus line Asymmetrical diode configuration ensures an optimized protection against ElectroMagnetic Interferences (EMI) of a LIN Electronic Control Unit (ECU) Max. peak pulse power: PPP=160W at tp=8/20 s Low clamping voltage: VCL=40V at IPP=1A Ultra low leakage current: IRM<1nA ESD protection of up to 23 kV IEC 61000-4-2, level 4 (ESD) IEC 61000-4-5 (surge); IPP=3A at tp=8/20 s AEC-Q101 Applications LIN-bus protection Automotive Quick reference data PESD1 LINLIN-bus ESD protection diodeRev. 3 31 May 2011 Product data sheetTable reference dataTamb=25 C unless otherwise standoff voltagePESD1 LIN (15 V)--15 VPESD1 LIN (24 V)--24 VCddiode capacitanceVR=0V; f=1 MHz-1317pF Nexperia 2017.

2 All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 2 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode2. Pinning information 3. Ordering information 4. Marking 5. Limiting values [1]Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC outlineGraphic symbol1cathode 1 (15 V)2cathode 2 (24 V)21006aab04112 Table informationType numberPackageNameDescriptionVersionPESD1 LINSC-76plastic surface-mounted package; 2 leadsSOD323 Table codesType numberMarking codePESD1 LINAMT able valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).SymbolParameterConditionsMinMaxUn itPPPpeak pulse powertp=8/20 s[1]-160 WIPP peak pulse currenttp=8/20 s[1]-3 ATjjunction temperature-150 CTambambient temperature 65+150 CTstgstorage temperature 65+150 C Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev.

3 3 31 May 2011 3 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode [1]Device stressed with ten non-repetitive ESD pulses. Table maximum ratingsSymbolParameterConditionsMinMaxUn itVESD electrostatic discharge voltageIEC 61000-4-2 (contact discharge)[1]-23kVMIL-STD-883 (human body model)-10kVTable standards complianceStandardConditionsIEC 61000-4-2; level 4 (ESD)> 15 kV (air); > 8 kV (contact)MIL-STD-883; class 3 (human body model)> 4 kVFig s pulse waveform according to IEC 61000-4-5 Fig pulse waveform according to IEC 61000-4-2t ( s)040301020001aaa6304080120 IPP(%)0e t100 % IPP; 8 s50 % IPP; 20 s001aaa631 IPP100 %90 %t30 ns60 ns10 %tr = ns to 1 ns Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 4 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode6. Characteristics [1]Non-repetitive current pulse 8/20 s exponential decay waveform according to IEC 61000-4-5.

4 Table C unless otherwise standoff voltagePESD1 LIN (15 V)--15 VPESD1 LIN (24 V)--24 VIRM reverse leakage currentPESD1 LIN (15 V)VRWM=15V-<150nAPESD1 LIN (24 V)VRWM=24V-<150nAVBR breakdown voltageIR=5mAPESD1 LIN (15 V) (24 V) capacitanceVR=0V; f=1 MHz-1317pFVCL clamping voltage[1]PESD1 LIN (15 V)IPP=1A--25 VIPP=5A--44 VPESD1 LIN (24 V)IPP=1A--40 VIPP=3A--70 Vrdifdifferential resistancePESD1 LIN (15 V)IR=1mA--225 PESD1 LIN (24 V)IR=1mA--300 Tamb=25 CFig pulse power as a function of exponential pulse duration; typical valuesFig variation of peak pulse power as a function of junction temperature; typical values006aaa164103102104 PPP(W)10tp ( s)110410310102Tj ( C) (25 C) Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 5 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode Fig clamping test setup and waveforms006aaa16650 RZCZ vertical scale = 200 V/divhorizontal scale = 50 ns/divunclamped +1 kV ESD voltage waveform(IEC 61000-4-2 network)clamped +1 kV ESD voltage waveform(IEC 61000-4-2 network)unclamped 1 kV ESD voltage waveform(IEC 61000-4-2 network)clamped 1 kV ESD voltage waveform(IEC 61000-4-2 network)vertical scale = 20 V/divhorizontal scale = 50 ns/divvertical scale = 200 V/divhorizontal scale = 50 ns/divvertical scale = 20 V/divhorizontal scale = 50 ns/divGNDGNDGNDGNDGNDGND450 RG 223/U50 coaxESD TESTERIEC 61000-4-2 networkCZ = 150 pF; RZ = 330 4 GHz DIGITALOSCILLOSCOPE10 (DeviceUnderTest)PESD1 LIN (15V)PESD1 LIN (15V)PESD1 LIN (24V)PESD1 LIN (24V) Nexperia 2017.

5 All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 6 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode7. Application informationThe PESD1 LIN is designed for the protection of one LIN-bus signal line from the damage caused by ESD and surge pulses. The PESD1 LIN provides a surge capability of up to 160 W per line for a 8/20 s waveform. Circuit board layout and protection device placementCircuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended:1. Place the PESD1 LIN as close to the input terminal or connector as The path length between the PESD1 LIN and the protected line should be Keep parallel signal paths to a Avoid running protection conductors in parallel with unprotected Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground Minimize the length of the transient return path to Avoid using shared transient return paths to a common ground Ground planes should be used whenever possible.

6 For multilayer PCBs, use ground Test Quality informationThis product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive application: ESD protection of one automotive LIN-bus line006aaa678 LINtransceiverPESD1 LINCMASTER/SLAVECBAT24 Vapplication ( voltage regulator and microcontroller)power application ( electro motor, inductive loads)LIN nodeconnector15 VBATGNDLIN12 Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 7 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode9. Package outline 10. Packing information [1]For further information and the availability of packing methods, see Section outline SOD323 (SC-76)03-12-17 Dimensions in methodsThe indicated -xxx are the last three digits of the 12NC ordering code.

7 [1]Type numberPackageDescriptionPacking quantity300010 000 PESD1 LINSOD3234 mm pitch, 8 mm tape and reel-115-135 Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 8 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode11. Soldering Fig soldering footprint SOD323 (SC-76)Fig soldering footprint SOD323 (SC-76) landssolder resistoccupied areasolder (2 ) (2 ) (2 ) (2 )sod323_frDimensions in (2 ) (2 ) landssolder resistoccupied areapreferred transportdirection during solderingDimensions in mm Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 9 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode12. Revision history Table historyDocument IDRelease dateData sheet statusChange noticeSupersedesPESD1 LIN data sheet-PESD1 LIN : Section Features and benefits : updated.

8 Figure 6: updated. Section 8 Test information : added. Section 13 Legal information : data sheet-PESD1 LIN data sheet-- Nexperia 2017. All rights reservedPESD1 LINAll information provided in this document is subject to legal data sheetRev. 3 31 May 2011 10 of 12 NexperiaPESD1 LINLIN-bus ESD protection diode13. Legal Data sheet status [1]Please consult the most recently issued document before initiating or completing a design. [2]The term short data sheet is explained in section Definitions . [3]The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at DefinitionsDraft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions.

9 Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing.

10 In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data DisclaimersLimited warranty and liability Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory.