1N5333B - 5 Watt Surmetic 40 Zener Voltage Regulators

1 DATA SHEET. 5 Watt Surmetic 40 Zener Voltage Regulators Cathode Anode 1N53 Series This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All this in an axial lead, transfer molded plastic package that offers protection in all common environmental conditions. AXIAL LEAD. CASE 017AA. Features PLASTIC. Zener Voltage Range V to 200 V. ESD Rating of Class 3 (>16 kV) per Human Body Model Surge Rating of up to 180 W @ ms MARKING DIAGRAM. Maximum Limits Guaranteed on up to Six Electrical Parameters Pb Free Packages are Available* A. 1N. Mechanical Characteristics 53xxB.

2 CASE: Void free, transfer molded, thermosetting plastic YYWWG. G. FINISH: All external surfaces are corrosion resistant and leads are readily solderable A = Assembly Location MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES: 1N53xxB = Device Number 260 C, 1/16 in. from the case for 10 seconds (Refer to Tables on Pages 3 & 4). POLARITY: Cathode indicated by polarity band YY = Year MOUNTING POSITION: Any WW = Work Week G = Pb Free Package (Note: Microdot may be in either location). MAXIMUM RATINGS. Rating Symbol Value Unit Max. Steady State Power Dissipation PD 5 W ORDERING INFORMATION. @ TL = 25 C, Lead Length = 3/8 in Derate above 25 C 40 mW/ C Device Package Shipping . Junction to Lead Thermal Resistance qJL 25 C/W 1N53xxB, G Axial Lead 1000 Units/Box (Pb Free).

3 Operating and Storage TJ, Tstg 65 to +200 C. Temperature Range (Note 1) 1N53xxBRL, G Axial Lead 4000/Tape & Reel (Pb Free). Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be For information on tape and reel specifications, assumed, damage may occur and reliability may be affected. including part orientation and tape sizes, please 1. Max operating temperature for DC conditions is 150 C, but not to exceed refer to our Tape and Reel Packaging Specifications 200 C for pulsed conditions with low duty cycle or non repetitive. Brochure, BRD8011/D. *For additional information on our Pb Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

4 Semiconductor Components Industries, LLC, 2013 1 Publication Order Number: August, 2021 Rev. 17 1N5333B /D. 1N53 Series ELECTRICAL CHARACTERISTICS (TA = 25 C unless I. otherwise noted, VF = V Max @ IF = A for all types). IF. Symbol Parameter VZ Reverse Zener Voltage @ IZT. IZT Reverse current ZZT Maximum Zener Impedance @ IZT. VZ VR V. IZK Reverse current IR VF. IZT. ZZK Maximum Zener Impedance @ IZK. IR Reverse Leakage current @ VR. VR Breakdown Voltage IF Forward current VF Forward Voltage @ IF. IR Maximum Surge current @ TA = 25 C Zener Voltage Regulator DVZ Reverse Zener Voltage Change IZM Maximum DC Zener current ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted, VF = V Max @ IF = A for all types).

5 Leakage Zener Voltage (Note 3) Zener Impedance (Note 3) current IR DVZ IZM. VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IZK IR @ VR (Note 4) (Note 5) (Note 6). Device Device (Note 2) Marking Min Nom Max mA W W mA mA Max Volts A Volts mA. 1N5333B 1N5333B 380 3 400 1 300 1 20 1440. 1N5334B 1N5334B 350 500 1 150 1 1320. 1N5335B 1N5335B 320 2 500 1 50 1 1220. 1N5336B 1N5336B 290 2 500 1 10 1 1100. 1N5337B 1N5337B 260 2 450 1 5 1 1010. 1N5338B 1N5338B 240 400 1 1 1 930. 1N5339B 1N5339B 220 1 400 1 1 2 865. 1N5340B 1N5340B 200 1 300 1 1 3 790. 1N5341B 1N5341B 200 1 200 1 1 3 765. 1N5342B 1N5342B 175 1 200 1 10 700. 1N5343B 1N5343B 175 200 1 10 630. 1N5344B 1N5344B 150 200 1 10 10 580. 1N5345B 1N5345B 150 2 200 1 10 545.

6 1N5346B 1N5346B 150 2 150 1 520. 1N5347B 1N5347B 10 125 2 125 1 5 475. Devices listed in bold, italic are onsemi Preferred devices. Preferred devices are recommended choices for future use and best overall value. 2. TOLERANCE AND TYPE NUMBER DESIGNATION: The JEDEC type numbers shown indicate a tolerance of 5%. 3. Zener Voltage (VZ) and IMPEDANCE (IZT and IZK): Test conditions for Zener Voltage and impedance are as follows: IZ is applied 40 10 ms prior to reading. Mounting contacts are located 3/8 to 1/2 from the inside edge of mounting clips to the body of the diode (TA = 25 C +8 C, 2 C). 4. SURGE current (IR): Surge current is specified as the maximum allowable peak, non recurrent square wave current with a pulse width, PW, of ms.

7 The data given in Figure 5 may be used to find the maximum surge current for a square wave of any pulse width between 1 ms and 1000 ms by plotting the applicable points on logarithmic paper. Examples of this, using the V and 200 V Zener are shown in Figure 6. Mounting contact located as specified in Note 2 (TA = 25 C +8 C, 2 C). 5. Voltage REGULATION (DVZ): The conditions for Voltage regulation are as follows: VZ measurements are made at 10% and then at 50%. of the IZ max value listed in the electrical characteristics table. The test current time duration for each VZ measurement is 40 10 ms. Mounting contact located as specified in Note 2 (TA = 25 C +8 C, 2 C). 6. MAXIMUM REGULATOR current (IZM): The maximum current shown is based on the maximum Voltage of a 5% type unit, therefore, it applies only to the B suffix device.

8 The actual IZM for any device may not exceed the value of 5 watts divided by the actual VZ of the device. TL = 25 C at 3/8 maximum from the device body. The G'' suffix indicates Pb Free package or Pb Free packages are available. 2. 1N53 Series ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted, VF = V Max @ IF = A for all types). Leakage Zener Voltage (Note 8) Zener Impedance (Note 8) current DVZ. IR (Note IZM. VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IZK IR @ VR (Note 9) 10) (Note 11). Device Device (Note 7) Marking Min Nom Max mA W W mA mA Max Volts A Volts mA. 1N5348B 1N5348B 11 125 125 1 5 430. 1N5349B 1N5349B 12 100 125 1 2 395. 1N5350B 1N5350B 13 100 100 1 1 365. 1N5351B 1N5351B 14 100 75 1 1 340.

9 1N5352B 1N5352B 15 75 75 1 1 315. 1N5353B 1N5353B 16 75 75 1 1 295. 1N5354B 1N5354B 17 70 75 1 280. 1N5355B 1N5355B 18 65 75 1 264. 1N5356B 1N5356B 19 65 3 75 1 250. 1N5357B 1N5357B 19 20 21 65 3 75 1 237. 1N5358B 1N5358B 22 50 75 1 216. 1N5359B 1N5359B 24 50 100 1 198. 1N5360B 1N5360B 25 50 4 110 1 19 190. 1N5361B 1N5361B 27 50 5 120 1 176. 1N5362B 1N5362B 28 50 6 130 1 170. 1N5363B 1N5363B 30 40 8 140 1 158. 1N5364B 1N5364B 33 40 10 150 1 144. 1N5365B 1N5365B 36 30 11 160 1 132. 1N5366B 1N5366B 39 30 14 170 1 122. 1N5367B 1N5367B 43 30 20 190 1 110. 1N5368B 1N5368B 47 25 25 210 1 100. 1N5369B 1N5369B 51 25 27 230 1 93. 1N5370B 1N5370B 56 20 35 280 1 86. 1N5371B 1N5371B 57 60 63 20 40 350 1 79.

10 1N5372B 1N5372B 62 20 42 400 1 76. 1N5373B 1N5373B 68 20 44 500 1 70. 1N5374B 1N5374B 75 20 45 620 1 56 63. 1N5375B 1N5375B 82 15 65 720 1 58. 1N5377B 1N5377B 91 15 75 760 1 1N5378B 1N5378B 95 100 105 12 90 800 1 76 1N5380B 1N5380B 114 120 126 10 170 1150 1 1N5381B 1N5381B 130 10 190 1250 1 1N5383B 1N5383B 150 8 330 1500 1 114 1N5384B 1N5384B 152 160 168 8 350 1650 1 122 1N5386B 1N5386B 171 180 189 5 430 1750 1 137 1N5387B 1N5387B 190 5 450 1850 1 144 25. 1N5388B 1N5388B 190 200 210 5 480 1850 1 152 Devices listed in bold, italic are onsemi Preferred devices. Preferred devices are recommended choices for future use and best overall value. 7. TOLERANCE AND TYPE NUMBER DESIGNATION: The JEDEC type numbers shown indicate a tolerance of 5%.