Axial-Lead Glass Passivated Standard

1 DATA Semiconductor Components Industries, LLC, 2012 November, 2021 Rev. 171 Publication Order Number:1N4001/DAxial-Lead GlassPassivated StandardRecovery Rectifiers1N4001, 1N4002, 1N4003,1N4004, 1N4005, 1N4006,1N4007 This data sheet provides information on subminiature size, axiallead mounted rectifiers for general purpose low power Shipped in Plastic Bags, 1000 per bag Available Tape and Reeled, 5000 per reel, by adding a RL suffix tothe part number Available in Fan Fold Packaging, 3000 per box, by adding a FF suffix to the part number Pb free Packages are AvailableMechanical Characteristics Case: Epoxy, Molded Weight: gram (approximately) Finish.

2 All External Surfaces Corrosion Resistant and TerminalLeads are Readily Solderable Lead and Mounting Surface Temperature for soldering Purposes:260 C Max. for 10 Seconds, 1/16 in. from case Polarity: Cathode Indicated by Polarity Band*For additional information on our Pb free strategy and soldering details, pleasedownload the onsemi soldering and Mounting Techniques Reference Manual, 59 10 AXIAL LEADPLASTICLEAD MOUNTED RECTIFIERS50 1000 VOLTSDIFFUSED JUNCTIONMARKING DIAGRAMSee detailed ordering and shipping information on page 5 ofthis data INFORMATIONA= Assembly Location1N400x = Device Numberx= 1, 2, 3, 4, 5, 6 or 7YY= YearWW= Work WeekG= Pb free Package(Note.)

3 Microdot may be in either location)A1N400xYYWWGG1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, RATINGSR atingSymbol1N40011N40021N40031N40041N400 51N40061N4007 Unit Peak Repetitive Reverse VoltageWorking Peak Reverse VoltageDC Blocking VoltageVRRMVRWMVR501002004006008001000V Non Repetitive Peak Reverse Voltage(halfwave, single phase, 60 Hz)VRSM6012024048072010001200V RMS Reverse VoltageVR(RMS)3570140280420560700V Average Rectified Forward Current(single phase, resistive load,60 Hz, TA = 75 C) Non Repetitive Peak Surge Current(surge applied at rated load conditions)IFSM30 (for 1 cycle)AOperating and Storage JunctionTemperature RangeTJTstg 65 to +150 CStresses exceeding those listed in the Maximum Ratings table may damage the device.

4 If any of these limits are exceeded, device functionalityshould not be assumed, damage may occur and reliability may be affected. Indicates JEDEC Registered DataTHERMAL CHARACTERISTICSR atingSymbolMaxUnitMaximum Thermal Resistance, Junction to AmbientRqJANote 1 C/WELECTRICAL CHARACTERISTICS RatingSymbolTypMaxUnitMaximum Instantaneous Forward Voltage Drop, (iF = Amp, TJ = 25 C) Full Cycle Average Forward Voltage Drop, (IO = Amp, TL = 75 C, 1 inch leads)VF(AV) Reverse Current (rated DC voltage)(TJ = 25 C)(TJ = 100 C) Full Cycle Average Reverse Current, (IO = Amp, TL = 75 C, 1 inch leads)IR(AV) 30mAProduct parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.

5 Productperformance may not be indicated by the Electrical Characteristics if operated under different conditions. Indicates JEDEC Registered Data1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, , INSTANTANEOUS FORWARD VOLTAGE (V)Figure 1. Typical Forward VoltageFigure 2. Typical Reverse , FORWARD CURRENT (A)TC = 25 CTC = 150 CTC = 100 098000100 200 300 400 500VR, REVERSE VOLTAGE (V)Figure 3. Typical Capacitance600 700900 1000IR, REVERSE CURRENT (A)TC = 25 CTC = 150 CTC = 100 041001160020406080100VR, REVERSE VOLTAGE (V)10120 140180 200C, CAPACITANCE (pF)TJ = 25 C1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, Length, LMountingMethod1/81/41/2 Units1235267 RqJA6572808750 C/W C/W C/WTYPICAL VALUES FOR RqJA IN STILL AIRData shown for thermal resistance, junction to ambient(RqJA) for the mountings shown is to be used as typicalguideline values for preliminary engineering or in case thetie point temperature cannot be 1.

6 AMBIENT MOUNTING DATAMOUNTING METHOD 1 MOUNTING METHOD 2 MOUNTING METHOD 3 LL LLVector Pin Mounting L = 3/8 Board Ground Board with1 1/2 X 1 1/2 Copper Surface 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, INFORMATIOND evicePackageShipping 1N4001 Axial Lead*1000 Units/Bag1N4001 GAxial Lead*(Pb free )1000 Units/Bag1N4001 RLAxial Lead*5000/Tape & Reel1N4001 RLGA xial Lead*(Pb free )5000/Tape & Reel1N4002 Axial Lead*1000 Units/Bag1N4002 GAxial Lead*(Pb free )1000 Units/Bag1N4002 RLAxial Lead*5000/Tape & Reel1N4002 RLGA xial Lead*(Pb free )5000/Tape & Reel1N4003 Axial Lead*1000 Units/Bag1N4003 GAxial Lead*(Pb free )1000 Units/Bag1N4003 RLAxial Lead*5000/Tape & Reel1N4003 RLGA xial Lead*(Pb free )5000/Tape & Reel1N4004 Axial Lead*1000 Units/Bag1N4004 GAxial Lead*(Pb free )1000 Units/Bag1N4004 RLAxial Lead*5000/Tape & Reel1N4004 RLGA xial Lead*(Pb free )5000/Tape & Reel1N4005 Axial Lead*1000 Units/Bag1N4005 GAxial Lead*(Pb free )1000 Units/Bag1N4005 RLAxial Lead*5000/Tape & Reel1N4005 RLGA xial Lead*(Pb free )5000/Tape & Reel1N4006 Axial Lead*1000 Units/Bag1N4006 GAxial Lead*(Pb free )1000 Units/Bag1N4006 FFGA xial Lead*(Pb free )

7 3000 Units/Box1N4006 RLAxial Lead*5000/Tape & Reel1N4006 RLGA xial Lead*(Pb free )5000/Tape & Reel1N4007 Axial Lead*1000 Units/Bag1N4007 GAxial Lead*(Pb free )1000 Units/Bag1N4007 FFGA xial Lead*(Pb free )3000 Units/Box1N4007 RLAxial Lead*5000/Tape & Reel1N4007 RLGA xial Lead*(Pb free )5000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel PackagingSpecifications Brochure, BRD8011/D.*This package is inherently Pb free . AxxxxxxYYWWSCALE 1 NOTES:1. DIMENSIONING AND TOLERANCING PER , CONTROLLING DIMENSION: ALL RULES AND NOTES ASSOCIATED WITHJEDEC DO 41 OUTLINE SHALL APPLY4.

8 POLARITY DENOTED BY CATHODE LEAD DIAMETER NOT CONTROLLED WITHIN LEADCASE 59 10 ISSUE UDATE 15 FEB 2005 GENERICMARKING DIAGRAM*xxx= Specific Device CodeA= Assembly LocationYY= YearWW= Work Week AxxxxxxYYWWSTYLE 1:PIN 1. CATHODE (POLARITY BAND)2. ANODESTYLE 2:NO POLARITYSTYLE 1 STYLE 2 STYLE 1 STYLE 2*This information is generic. Please refer todevice data sheet for actual part free indicator, G or microdot G ,may or may not be INDICATOROPTIONAL AS NEEDED(SEE STYLES)MECHANICAL CASE OUTLINEPACKAGE DIMENSIONSON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other Semiconductor reserves the right to make changes without further notice to any products herein.

9 ON Semiconductor makes no warranty, representation or guarantee regardingthe suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specificallydisclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor therights of NUMBER:DESCRIPTION:Electronic versions are uncontrolled except when accessed directly from the Document versions are uncontrolled except when stamped CONTROLLED COPY in 1 OF 1 AXIAL LEAD Semiconductor Components Industries, LLC, , , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliatesand/or subsidiaries in the United States and/or other countries.

10 Onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual listing of onsemi s product /patent coverage may be accessed at onsemi reserves the right to make changes at any time to anyproducts or information herein, without notice. The information herein is provided as is and onsemi makes no warranty, representation or guarantee regarding the accuracy of theinformation, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or useof any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.