Is Now Part of - onsemi.com

1 To learn more about ON Semiconductor, please visit our website at note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at Please email any questions regarding the system integration to Now part ofON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

2 ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor s product/patent coverage may be accessed at ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor.

3 Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part .

4 ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any Plastic Silicon 2018 Semiconductor Components Industries, LCC QSD2030 Rev. 2 November 2018 QSD2030 Plastic Silicon Photodiode Features PIN photodiode Package type: T-1 3/4 (5mm lens diameter) Wide reception angle, 40 Package material and color: clear epoxy High sensitivity Peak sensitivity = 880nm Radiant sensitive area: x ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )SQ. (2X) for all drawings are in inches (mm).2. Tolerance of ( ) on all non-nominal dimensions unless otherwise 2018 Semiconductor Components Industries, LCC QSD2030 Rev.

5 22 QSD2030 Plastic Silicon PhotodiodeAbsolute Maximum Ratings (TA = 25 C unless otherwise specified)Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Notes:1. Derate power dissipation linearly C above 25 RMA flux is Methanol or isopropyl alcohols are recommended as cleaning Soldering iron 1/16 ( ) minimum from Characteristics (TA =25 C)SymbolParameterRatingUnitTOPRO perating Temperature-40 to +100 CTSTGS torage Temperature-40 to +100 CTSOL-ISoldering Temperature (Iron)(2,3,4)240 for 5 sec CTSOL-FSoldering Temperature (Flow)(2,3)260 for 10 sec CVBRR everse Breakdown Voltage50 VPDP ower Dissipation(1)

6 100mWSymbolParameterTest PSPeak Sensitivity Wavelength880nm SRWavelength Sensitivity Range4001100nm Reception Angle 20 VFForward VoltageIF = Dark CurrentVR = 10V, Ee = 010nAILR everse Light CurrentEe = , VR = 5V, = 950nm1525 AVOOpen Circuit VoltageEe = , = 880nm420mVTCVT emperature Coefficient of VO+ / KISCS hort Circuit CurrentEe = , = 880nm50 ATCIT emperature Coefficient of ISC+ / KCCapacitanceVR = 0, f = 1 MHz, Ee = 015pFtrRise TimeVR = 5V, RL = 50 , = 950nm5nstfFall 2018 Semiconductor Components Industries, LCC QSD2030 Rev. 23 QSD2030 Plastic Silicon PhotodiodeTypical Performance CharacteristicsFigure 4. Dark Current vs. Reverse VoltageFigure 3. Capacitance vs. Reverse VoltageFigure 1.

7 Reverse Light Current vs. Emitter Output PowerFigure 2. Angular ResponseVR Break Down Voltage (V)ID Dark Current (nA)Vr Reverse Voltage (V)Cj Capacitance (pF) = 25 CVR = 5 VTA = 25 C0246810121416182014121086420Ee Emitter output power (mw/cm2) 10 20 30 40 50 60 70 80 90 Reverse Light Current Voltage ( A) 2018 Semiconductor Components Industries, LCC QSD2030 Rev. 24 TRADEMARKST hefollowing includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andisnotintended to be an exhaustive list of all such Auto-SPM Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED DualCool EcoSPARK EfficientMax ESBC Fairchild FairchildSemiconductor FACTQ uiet Series FACT FAST FastvCore FETB ench FlashWriter *FPS F-PFS FRFET GlobalPower ResourceSMGreenFPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax Motion-SPM OptoHiT OPTOLOGIC OPTOPLANAR PDPSPM Power-SPM PowerTrench PowerXS Programmable Active Droop QFET QS QuietSeries RapidConfigure Saving our world.

8 1mW/W/kW at a time SignalWise SmartMax SMART START SPM STEALTH SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 SupreMOS SyncFET Sync-Lock *ThePower Franchise TinyBoost TinyBuck TinyCalc TinyLogic TINYOPTO TinyPower TinyPWM TinyWire TriFault Detect TRUECURRENT *"SerDes UHC UltraFRFET UniFET VCX VisualMax XS * Trademarks of System General Corporation, used under license by Fairchild SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVERELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTOR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

9 THESESPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,WHICH COVERS THESE SUPPORT POLICYFAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THEEXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR used herein:1. Life support devices or systems are devices or systems which, (a)are intended for surgical implant into the body or (b) support orsustain life, and (c) whose failure to perform when properly used inaccordance with instructions for use provided in the labeling, can bereasonably expected to result in a significant injury of the A critical component in any component of a life support, device, orsystem whose failure to perform can be reasonably expected tocause the failure of the life support device or system, or to affect itssafety or POLICYF airchild Semiconductor Corporation's Anti-Counterfeiting Policy.

10 Fairchild's Anti-Counterfeiting Policy is also stated on our external website, ,under Sales of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of theirparts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance,failedapplications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customersfromtheproliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized FairchildDistributors who are listed by country on our web page cited above.