MPSA42, MPSA43 High Voltage Transistors

1 Semiconductor Components Industries, LLC, 2013 February, 2013 Rev. 81 Publication Order Number: mpsa42 /DMPSA42, MPSA43 high Voltage TransistorsNPN SiliconFeatures These are Pb Free Devices*MAXIMUM RATINGSR atingSymbolValueUnitCollector Emitter VoltageMPSA43 mpsa42 VCEO200300 VdcCollector Base VoltageMPSA43 mpsa42 VCBO200300 VdcEmitter Base Current ContinuousIC500mAdcTotal Device Dissipation@ TA = 25 CDerate above 25 CTotal Device Dissipation@ TC = 25 CDerate above 25 COperating and Storage JunctionTemperature RangeTJ, Tstg 55 to+150 CTHERMAL CHARACTERISTICSC haracteristicSymbolMaxUnitThermal Resistance,Junction to AmbientRqJA200 C/WThermal Resistance,Junction to C/WStresses exceeding Maximum Ratings may damage the device. MaximumRatings are stress ratings only. Functional operation above the RecommendedOperating Conditions is not implied. Extended exposure to stresses above theRecommended Operating Conditions may affect device reliability.

2 *For additional information on our Pb Free strategy and soldering details, pleasedownload the ON Semiconductor Soldering and Mounting TechniquesReference Manual, or 3A= Assembly LocationY=YearWW=Work WeekG= Pb Free Package(Note: Microdot may be in either location)See detailed ordering and shipping information in the packagedimensions section on page 3 of this data INFORMATIONCOLLECTOR32 BASE1 EMITTERMARKING DIAGRAMMPSA4xAYWWGGTO 92(TO 226AA)CASE 29 1112312 BENT LEADSTRAIGHT LEAD3 mpsa42 , MPSA43 CHARACTERISTICS (TA = 25 C unless otherwise noted)CharacteristicSymbolMinMaxUnitOFF CHARACTERISTICSC ollector Emitter Breakdown Voltage (Note 1)(IC = mAdc, IB = 0) mpsa42 MPSA43V(BR)CEO300200 VdcCollector Base Breakdown Voltage (IC = 100 mAdc, IE = 0) mpsa42 MPSA43V(BR)CBO300200 VdcEmitter Base Breakdown Voltage (IE = 100 mAdc, IC = 0)V(BR) VdcCollector Cutoff Current(VCB = 200 Vdc, IE = 0) mpsa42 (VCB = 160 Vdc, IE = 0) MPSA43 ICBO Cutoff Current(VEB = Vdc, IC = 0) mpsa42 (VEB = Vdc, IC = 0) MPSA43 IEBO CHARACTERISTICS (Note 1)DC Current Gain(IC = mAdc, VCE = 10 Vdc)(IC = 10 mAdc, VCE = 10 Vdc)

3 (IC = 30 mAdc, VCE = 10 Vdc)hFE254040 Collector Emitter Saturation Voltage (IC = 20 mAdc, IB = mAdc) mpsa42 MPSA43 VCE(sat) Emitter Saturation Voltage (IC = 20 mAdc, IB = mAdc)VBE(sat) SIGNAL CHARACTERISTICSC urrent Gain Bandwidth Product(IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz)fT50 MHzCollector Base Capacitance(VCB = 20 Vdc, IE = 0, f = MHz) mpsa42 MPSA43 Ccb Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. mpsa42 , MPSA43 INFORMATIOND evicePackageShipping mpsa42 GTO 92(Pb Free)5000 Units / BoxMPSA42RL1 GTO 92(Pb Free)2000 / Tape & ReelMPSA42 RLRAGTO 92(Pb Free)2000 / Tape & ReelMPSA42 RLRMGTO 92(Pb Free)2000 / Ammo PackMPSA42 RLRPGTO 92(Pb Free)2000 / Ammo PackMPSA42ZL1 GTO 92(Pb Free)2000 / Ammo Pack For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel PackagingSpecifications Brochure, BRD8011 , MPSA43 , CAPACITANCE (pF)Figure 1.

4 DC Current GainVR, REVERSE Voltage (VOLTS) @ 1 MHzFigure 2. CapacitanceIC, COLLECTOR CURRENT (mA)V, Voltage (VOLTS) @ 1 MHzVBE(on) @ 25 C, VCE = 10 VVCE(sat) @ 25 C, IC/IB = 10 VBE(sat) @ 25 C, IC/IB = 10 VCE(sat) @ 125 C, IC/IB = 10 VCE(sat) @ -55 C, IC/IB = 10 VBE(sat) @ 125 C, IC/IB = 10 VBE(sat) @ -55 C, IC/IB = 10 VBE(on) @ 125 C, VCE = 10 VVBE(on) @ -55 C, VCE = 10 VFigure 3. ON VoltagesIC, COLLECTOR CURRENT (mA) , DC CURRENT GAINTJ = +125 C25 C-55 CVCE = 10 Vdc1002040 mpsa42 , MPSA43 4. Current Gain Bandwidth ProductfT, CURRENT GAIN BANDWIDTHPRODCUT (MHz)IC, COLLECTOR CURRENT (mA)VCE = 2 VTA = 25 , COLLECTOR CURRENT (A)Figure 5. Safe Operating AreaVCE, COLLECTOR EMITTER Voltage (V)10 sMPSA42, MPSA43 DIMENSIONSTO 92 (TO 226)CASE 29 11 ISSUE ANSTYLE 1:PIN 1. EMITTER2. BASE3. COLLECTORNOTES:1. DIMENSIONING AND TOLERANCING PER , CONTROLLING DIMENSION: CONTOUR OF PACKAGE BEYOND DIMENSION RIS LEAD DIMENSION IS UNCONTROLLED IN P ANDBEYOND DIMENSION K X XCVDNNXXSEATINGPLANEDIM MINMAXMIN :1.

5 DIMENSIONING AND TOLERANCING PERASME , CONTROLLING DIMENSION: CONTOUR OF PACKAGE BEYONDDIMENSION R IS LEAD DIMENSION IS UNCONTROLLED IN PAND BEYOND DIMENSION K X XCVDNXXSEATINGPLANEDIM LEADBENT LEADON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for anyparticular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including withoutlimitation special, consequential or incidental damages.

6 Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applicationsand actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended forsurgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation wherepersonal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC andits officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufactureof the part.

7 SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any ORDERING INFORMATIONN. American Technical Support: 800 282 9855 Toll FreeUSA/CanadaEurope, Middle East and Africa Technical Support:Phone: 421 33 790 2910 Japan Customer Focus CenterPhone: 81 3 5817 1050 mpsa42 /DLITERATURE FULFILLMENT:Literature Distribution Center for ON Box 5163, Denver, Colorado 80217 USAP hone: 303 675 2175 or 800 344 3860 Toll Free USA/CanadaFax: 303 675 2176 or 800 344 3867 Toll Free USA/CanadaEmail: Semiconductor Website: Literature: additional information, please contact your localSales Representativ