BAV99LT1 - Dual Series Switching Diode

1 Semiconductor Components Industries, LLC, 1994 October, 2016 Rev. 121 Publication Order Number: BAV99LT1 /DBAV99L, SBAV99 LDual SeriesSwitching DiodeFeatures S Prefix for Automotive and Other Applications Requiring UniqueSite and Control Change Requirements; AEC Q101 Qualified andPPAP Capable These Devices are Pb Free, Halogen Free/BFR Free and are RoHSCompliantMAXIMUM RATINGS (Each Diode )RatingSymbolValueUnitReverse VoltageVR100 VdcForward CurrentIF215mAdcPeak Forward Surge CurrentIFM(surge)500mAdcRepetitive Peak Reverse VoltageVRRM100 VAverage Rectified Forward Current (Note 1)(averaged over any 20 ms period)IF(AV)715mARepetitive Peak Forward CurrentIFRM450mANon Repetitive Peak Forward Currentt = mst = mst = exceeding those listed in the Maximum Ratings table may damagethe device.

2 If any of these limits are exceeded, device functionality should notbe assumed, damage may occur and reliability may be CHARACTERISTICSC haracteristicSymbolMaxUnitTotal Device DissipationFR 5 Board (Note 1) TA = 25 CDerate above 25 CThermal Resistance, Junction to AmbientRqJA556 C/WTotal Device DissipationAlumina Substrate (Note 2)TA = 25 CDerate above 25 CThermal Resistance, Junction to AmbientRqJA417 C/WJunction and StorageTemperature RangeTJ, Tstg 65 to+150 C1. FR 5 = Alumina = in ORDERING INFORMATIONCASE 318 SOT 23 STYLE 11 MARKING DIAGRAM3 CATHODE/ANODEANODE1 CATHODE2 For information on tape and reel specifications,including part orientation and tape sizes, pleaserefer to our Tape and Reel Packaging SpecificationsBrochure, BRD8011 23(Pb Free)10,000 / Tape & ReelBAV99LT1 GSOT 23(Pb Free)3,000 / Tape & Reel1A7 MGG*Date Code orientation and/or overbar mayvary depending upon manufacturing = Device CodeM= Date Code*G= Pb Free Package(Note.)

3 Microdot may be in either location)SBAV99LT1 GSOT 23(Pb Free)3,000 / Tape & ReelSBAV99LT3 GSOT 23(Pb Free)10,000 / Tape & , characteristics (TA = 25 C unless otherwise noted) (Each Diode )CharacteristicSymbolMinMaxUnitReve rse Breakdown Voltage,(I(BR) = 100 mA)V(BR)100 VdcReverse Voltage Leakage Current,(VR = 100 Vdc)(VR = 25 Vdc, TJ = 150 C)(VR = 70 Vdc, TJ = 150 C)IR Capacitance,(VR = 0, f = MHz)CD Voltage,(IF = mAdc)(IF = 10 mAdc)(IF = 50 mAdc)(IF = 150 mAdc)VF 71585510001250mVdcReverse Recovery Time,(IF = IR = 10 mAdc, iR(REC) = mAdc) RL = 100 Wtrr Recovery Voltage, (IF = 10 mA, tr = 20 ns)VFR APPLICABLE TO EACH DIODEVF, FORWARD VOLTAGE (V)VR, REVERSE VOLTAGE (V)Figure 1.

4 Forward VoltageFigure 2. Leakage CurrentFigure 3. = 85 CTA = 55 CTA = 25 CTA = 40 CTA = 55 CTA = 150 CIF, FORWARD CURRENT (mA)TA = 125 10203040506070TA = 85 CTA = 55 CTA = 125 CTA = 150 CTA = 25 CIR, REVERSE CURRENT (mA) , REVERSE VOLTAGE (V)Cd, Diode CAPACITANCE (pF) 23 (TO 236)CASE 318 08 ISSUE ASDATE 30 JAN 2018 SCALE 4:1DA13121 XXXMGGXXX = Specific Device CodeM= Date CodeG= Pb Free Package*This information is generic. Please refer todevice data sheet for actual part Free indicator, G or microdot G ,may or may not be DIAGRAM*NOTES:1. DIMENSIONING AND TOLERANCING PER ASME , CONTROLLING DIMENSION: MAXIMUM LEAD THICKNESS INCLUDES LEAD LEAD THICKNESS IS THE MINIMUM THICKNESS OFTHE BASE DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,PROTRUSIONS, OR GATE FOOTPRINTVIEW VIEW 22:PIN 1.

5 RETURN2. OUTPUT3. INPUTSTYLE 6:PIN 1. BASE2. EMITTER3. COLLECTORSTYLE 7:PIN 1. EMITTER2. BASE3. COLLECTORSTYLE 8:PIN 1. ANODE2. NO CONNECTION3. CATHODESTYLE 9:PIN 1. ANODE2. ANODE3. CATHODESTYLE 10:PIN 1. DRAIN2. SOURCE3. GATESTYLE 11:PIN 1. ANODE2. CATHODE3. CATHODE ANODESTYLE 12:PIN 1. CATHODE2. CATHODE3. ANODESTYLE 13:PIN 1. SOURCE2. DRAIN3. GATESTYLE 14:PIN 1. CATHODE2. GATE3. ANODESTYLE 15:PIN 1. GATE2. CATHODE3. ANODESTYLE 16:PIN 1. ANODE2. CATHODE3. CATHODESTYLE 17:PIN 1. NO CONNECTION2. ANODE3. CATHODESTYLE 18:PIN 1. NO CONNECTION2. CATHODE3. ANODESTYLE 19:PIN 1. CATHODE2.

6 ANODE3. CATHODE ANODESTYLE 23:PIN 1. ANODE2. ANODE3. CATHODESTYLE 20:PIN 1. CATHODE2. ANODE3. GATESTYLE 21:PIN 1. GATE2. SOURCE3. DRAINSTYLE 1 THRU 5:CANCELLEDSTYLE 24:PIN 1. GATE 2. DRAIN 3. SOURCESTYLE 25:PIN 1. ANODE 2. CATHODE 3. GATESTYLE 26:PIN 1. CATHODE 2. ANODE 3. NO CONNECTIONSTYLE 27:PIN 1. CATHODE 2. CATHODE 3. 100 10T T3 XTOP VIEWSIDE VIEWEND : 28:PIN 1. ANODE 2. ANODE 3. ANODEMECHANICAL CASE OUTLINEPACKAGE DIMENSIONSON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other Semiconductor reserves the right to make changes without further notice to any products herein.

7 ON Semiconductor makes no warranty, representation or guarantee regardingthe suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specificallydisclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor therights of NUMBER:DESCRIPTION:Electronic versions are uncontrolled except when accessed directly from the Document versions are uncontrolled except when stamped CONTROLLED COPY in 1 OF 1 SOT 23 (TO 236) Semiconductor Components Industries, LLC, Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.

8 A listing of ON Semiconductor s product/patentcoverage may be accessed at ON Semiconductor reserves the right to make changes without further notice to any products Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liabilityarising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,regardless of any support or applications information provided by ON Semiconductor.

9 Typical parameters which may be provided in ON Semiconductor data sheets and/orspecifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customerapplication by customer s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are notdesigned, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classificationin a foreign jurisdiction or any devices intended for implantation in the human body.

10 Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorizedapplication, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, andexpenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if suchclaim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. Thisliterature is subject to all applicable copyright laws and is not for resale in any ORDERING INFORMATIONTECHNICAL SUPPORTN orth American Technical Support:Voice Mail: 1 800 282 9855 Toll Free USA/CanadaPhone: 011 421 33 790 2910 LITERATURE FULFILLMENT:Email Requests to: Semiconductor Website: , Middle East and Africa Technical Support:Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative