Transcription of NOIP1SN1300A - PYTHON 1.3/0.5/0.3 MegaPixels Global ...
1 DATA Semiconductor Components Industries, LLC, 2016 August, 2021 Rev. 61 Publication Order Number: NOIP1SN1300A /DPYTHON MegaPixelsGlobal Shutter cmos Image SensorsNOIP1SN1300 AFEATURES Size Options: PYTHON 300: 640 x 480 Active Pixels, 1/4 Optical Format PYTHON 500: 800 x 600 Active Pixels, 1 Optical Format PYTHON 1300: 1280 x 1024 Active Pixels, 1/2 Optical Format Data Output Options: P1 SN/SE/FN: 4 LVDS Data Channels P2 SN/SE: 10 bit Parallel P3 SN/SE/FN: 2 LVDS Data Channels mm x mm Low Noise Global Shutter Pixels withIn-pixel CDS Monochrome (SN), Color (SE) and NIR (FN) Zero Row Overhead Time (ZROT) Mode EnablingHigher Frame Rate Frame Rate at Full Resolution, 4 LVDS Data Channels(P1 SN/SE/FN only) 210/165 frames per second @ SXGA(ZROT/NROT) 545/385 frames per second @ SVGA(ZROT/NROT) 815/545 frames per second @ VGA (ZROT/NROT) Frames Rate at Full Resolution ( cmos ) 50/43 Frames per Second @ SXGA (ZROT/NROT) On chip 10 bit Analog to Digital Converter (ADC)
2 Four/Two/One LVDS High Speed Serial Outputs orParallel cmos Output Random Programmable Region of Interest (ROI)Readout Serial Peripheral Interface (SPI) Automatic Exposure Control (AEC) Phase locked Loop (PLL) High Dynamic Range (HDR) Modes Possible Dual Power Supply ( V and V) 40 C to +85 C Operational Temperature Range 48 pin LCC Power Dissipation: 620 mW (P1, 4 LVDS, ZROT) 420 mW (P1, P3, 2 LVDS, NROT) 270 mW (P1, P3, 1 LVDS, NROT) 420 mW (P2, ZROT) These Devices are Pb Free and are RoHS CompliantAPPLICATIONS Machine Vision Motion Monitoring Security Barcode Scanning (2D)DESCRIPTIONThe PYTHON 300, PYTHON 500, and PYTHON 1300image sensors utilize high sensitivity mm x mm pixelsthat support low noise pipelined and triggered globalshutter readout modes.
3 The sensors support correlateddouble sampling (CDS) readout, reducing noise andincreasing dynamic image sensors have on chip programmable gainamplifiers and 10 bit A/D converters. The integration timeand gain parameters can be reconfigured without any visibleimage artifact. Optionally the on chip automatic exposurecontrol loop (AEC) controls these parameters image s black level is either calibrated automatically orcan be adjusted by adding a user programmable high level of programmability using a four wire serialperipheral interface enables the user to read out specificregions of interest.
4 Up to eight regions can be programmed,achieving even higher frame image data interface of the P1 SN/SE/FN devicesconsists of four LVDS lanes, enabling frame rates up to 210frames per second in Zero ROT mode for thePYTHON 1300. Each channel runs at 720 Mbps. A separatesynchronization channel containing payload information isprovided to facilitate the image reconstruction at thereceiving end. The P2 SN/SE devices provide a parallelCMOS output interface at reduced frame rate. TheP3 SN/SE/FN devices are the same as the P1 SN/SE/FNbut with only two of the four LVDS data channels enabled,facilitating frame rates of 90 frames per second in NormalROT for the PYTHON 1.
5 PYTHON devices are provided in a 48 pin LCC package and are available in monochrome, Bayer color, and extendednear infrared (NIR) INFORMATIONPart NumberDescriptionPackagePYTHON 1300 NOIP1SN1300A Megapixel, Monochrome, LVDS Output48 pin LCCNOIP1SE1300A Megapixel, Bayer Color, LVDS OutputNOIP1FN1300A Megapixel, Monochrome with enhanced NIR, LVDS OutputNOIP2SN1300A Megapixel, Monochrome, cmos (parallel) OutputNOIP2SE1300A Megapixel, Bayer Color, cmos (parallel) OutputNOIP1SN1300A Megapixel, Monochrome, LVDS Output, Protective FoilNOIP1SE1300A Megapixel, Bayer Color, LVDS Output, Protective FoilNOIP1FN1300A Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective FoilNOIP3SN1300A Megapixel, 2 LVDS Outputs, MonochromeNOIP3FN1300A Megapixel, 2 LVDS Outputs, NIR enhanced MonochromeNOIP3SE1300A Megapixel, 2 LVDS Outputs, ColorNOIP3SN1300A Megapixel, 2 LVDS Outputs, Monochrome, Protective FoilNOIP3FN1300A Megapixel, 2 LVDS Outputs, NIR enhanced Monochrome.
6 Protective FoilNOIP3SE1300A Megapixel, 2 LVDS Outputs, Color, Protective FoilPYTHON 500 NOIP1SN0500A Megapixel, Monochrome, LVDS Output48 pin LCCNOIP1SE0500A Megapixel, Bayer Color, LVDS OutputNOIP1FN0500A Megapixel, Monochrome with enhanced NIR, LVDS OutputNOIP1SN0500A Megapixel, Monochrome, LVDS Output, Protective FoilNOIP1SE0500A Megapixel, Bayer Color, LVDS Output, Protective FoilNOIP1FN0500A Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective FoilPYTHON 300 NOIP1SN0300A Megapixel, Monochrome, LVDS Output48 pin LCCNOIP1SE0300A Megapixel, Bayer Color, LVDS OutputNOIP1FN0300A Megapixel, Monochrome with enhanced NIR, LVDS OutputNOIP1SN0300A Megapixel, Monochrome, LVDS Output, Protective FoilNOIP1SE0300A Megapixel, Bayer Color, LVDS Output, Protective FoilNOIP1FN0300A Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective FoilThe P1 SN/SE/FN base part references the mono, color and NIR enhanced versions of the 4 LVDS interface; the P2 SN/SEbase part references the mono and color versions of the cmos interface.
7 The P3 SN/SE/FN base part references the mono,color and NIR enhanced version of the 2 LVDS interface. More details on the part number coding can be found Package MarkLine 1: NOIPyxxRRRRA where y is either 1 for 4 LVDS Outputs, 2 for cmos Parallel Output, 3 for 2 LVDS Outputs,where xx denotes mono micro lens (SN) or color micro lens (SE) or NIR micro lens (FN)RRRR is the resolution (1300), (0500) or (0300)Line 2: QDI (without protective foil), QTI (with protective foil)Line 3: AWLYYWW where AWL is PRODUCTION lot traceability, YYWW is the 4 digit date SpecificationsTable 1.
8 GENERAL SPECIFICATIONSP arameterSpecificationPixel typeIn pixel CDS. Global shutter pixel architectureShutter typePipelined and triggered Global shutterFrame rateZero ROT/Normal ROTmodeP1 SN/SE/FN: PYTHON 300: 815/545 fps PYTHON 500: 545/385 fps PYTHON 1300: 210/165 fpsP2 SN/SE: 50/43 fpsP3 SN/SE/FN: NA/90 fpsMaster clockP1, P3 SN/SE/FN:72 MHz when PLL is used,360 MHz (10 bit) / 288 MHz (8 bit)when PLL is not usedP2 SN/SE: 72 MHzWindowing8 Randomly programmable windows. Nor-mal, sub sampled and binned readoutmodesADC resolution10 bit, 8 bit (Note 1)LVDS outputsP1 SN/SE/FN: 4/2/1 data + sync + clockP3 SN/SE/FN: 2/1 data + sync + clockCMOS outputsP2 SN/SE: 10 bit parallel output,frame_valid, line_valid, clockData rateP1 SN/SE/FN: 4 x 720 Mbps (10 bit) / 4 x 576 Mbps (8 bit)P2 SN/SE: 72 MhzP3 SN/SE/FN: 2 x 720 Mbps (10 bit)Power dissipation(10 bit mode)P1 SN/SE/FN: 620 mW (4 data channels)P1, P3 SN/SE/FN: 420 mW (2 data ch.)
9 P1, P3 SN/SE/FN: 270 mW (1 data ch.)P2 SN/SE: 420 mWPackage type48 pin LCCT able 2. ELECTRO OPTICAL SPECIFICATIONSP arameterSpecificationActive pixelsPYTHON 300: 640 (H) x 480 (V) PYTHON 500: 800 (H) x 600 (V) PYTHON 1300: 1280 (H) x 1024 (V)Pixel mm x mmConversion LSB10/e 140 mV/e Dark temporal noise< 9 e (Normal ROT, 1x gain)< 7 e (Normal ROT, 2x gain)Responsivity at 550 LightSensitivity (PLS)<1/8000 Full Well Charge10000 e Quantum Efficiencyat 550 nm56%Pixel FPN< LSB10 PRNU< 2% or 10 LSB10 on half scale response of 525 LSB10 MTF68% @ 535 nm X dir & Y dirPSNL at 20 C120 LSB10/s, 1200 e /sDark signal at 20 C5 e /s, LSB10/sDynamic Range> 60 dB in Global shutter modeSignal to Noise Ratio(SNR max)40 dBTable 3.
10 RECOMMENDED OPERATING RATINGS (Note 2)SymbolDescriptionMinMaxUnitTJOperating temperature range 4085 CFunctional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyondthe Recommended Operating Ranges limits may affect device 4. ABSOLUTE MAXIMUM RATINGS (Notes 3 and 4)SymbolParameterMinMaxUnitABS ( V supply group)ABS rating for V supply group ( V supply group)ABS rating for V supply group storage temperature range 40+150 CABS storage humidity range at 85 C85%RHElectrostatic discharge (ESD)Human Body Model (HBM): JS 001 20102000 VCharged Device Model (CDM): JESD22 C101500 LULatch up: JESD 78100mAStresses exceeding those listed in the Maximum Ratings table may damage the device.
